B0006 code meaning
Driver Frontal Deployment Loop Short to Ground
What B0006 means
B0006 is missing from the public J2012 code lists, which go straight from B0005 to B0010. The only documented use found has nothing to do with airbags: on the 2025 Ram 1500 the body control module stores B0006-11 for a short to ground in the latch control of the left RamBox stowage lid, fixed by a module update (flash 08-204-24). The title describes a driver airbag firing loop shorted to ground. Current restraint modules report that as a fault byte on the stage code instead, for example GM B0012 02 on the 2011 Saab 9-4X, set after two seconds of ground short. A ground short in a squib circuit can stop the stage from firing, so the scan tool must first show which module stored B0006 before anyone works on the airbag.
B0006 at a glance
- Check engine lightUsually not
- Emissions testNot an emissions code
- Limp modeNot expected
- Repair difficultyWorkshop only
- Typical labor0.5 to 3 hours
- Clears after repairWhen cleared with a scanner
Symptoms of B0006
- Airbag warning lamp on when stored by the restraint module
- On Ram 1500 2025 stowage lid will not open electrically, alarm may sound
- Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed
Common causes of B0006
- PossibleOn Ram 1500 2025 the code belongs to the left stowage lid latch circuit of the body module, not the airbag
- PossibleDriver airbag squib lead chafed against metal (ground short)
- Less likelyInsulation damage inside the clock spring
Check the most likely causes first. Replacing parts by guesswork is the most expensive way to clear a code.
Parts involved
Driver airbag moduleSRS wiringClock spring
What each part of B0006 means
| B | Body system: airbags, seat belts, power seats, lights and climate control. |
| 0 | Generic code: it means the same on every make (SAE standard). |
| 06 | The exact fault in that area. |
What to do next
- Note B0006 and any other codes stored with it: several codes together often point to one cause.
- Check for loose connectors and damaged wiring around the parts the code names.
- Check open recalls for your car: some faults are fixed for free by the dealer. Enter your VIN.
- Clear the code only after the repair. If it comes back, the fault is still there.
Buying a used car? Scan it for stored codes before you pay. A recently cleared memory can hide a problem.
Questions about B0006
What does B0006 mean?
B0006 means "Driver Frontal Deployment Loop Short to Ground". B0006 is missing from the public J2012 code lists, which go straight from B0005 to B0010. It is a generic code, so it means the same on every make.
Is it safe to drive with B0006?
B0006 does not normally turn on the check engine light by itself. Watch for the symptoms above and have it checked soon.
Will B0006 fail an emissions test?
B0006 is not an emissions code, so on its own it usually does not fail an emissions test. Other stored codes or a lit check engine light still can.
How hard is B0006 to fix?
Difficulty: workshop only. A typical repair takes 0.5 to 3 hours of work. This is a job for a workshop.
Will B0006 clear itself after the repair?
Clear the code with a scanner after the repair. If the fault is fixed, it does not come back.