B010C code meaning
Camera Washer Actuator C
What B010C means
B010C names actuator C. Front cameras sit in the grille and get a jet of their own. Ford's TSB 20-2267 (2020) covers 2015–2020 F-150 (not Raptor), 2017–2020 Super Duty and 2018–2020 Expedition fitted with a front camera wash: the jet dripped fluid when idle because of its internal rubber seal, and the cure is a new jet, with the grille removed and the 360-degree camera aligned afterwards. Asmo's application US20110292212A1 explains why such jets carry a check valve: it opens only under pump pressure, so fluid neither runs onto the lens nor lets air into the line. A leaking seal sets no electrical code by itself; B010C points to the actuator or its circuit. The camera tied to C is unpublished, as is any maker use of the code.
B010C at a glance
- Check engine lightUsually not
- Emissions testNot an emissions code
- Limp modeNot expected
- Repair difficultyMedium, DIY possible
- Typical labor0.5 to 2 hours
- Clears after repairWhen cleared with a scanner
Symptoms of B010C
- Front camera lens is not sprayed when the wash is requested
- Front or 360-degree camera image stays dirty in winter or after off-road driving
Common causes of B010C
- Most likelyDamaged wiring or plug at the front end, exposed to stone chips, water and salt
- PossiblePump or valve C seized or electrically defective
- Less likelyPlug left disconnected after grille or bumper work
Check the most likely causes first. Replacing parts by guesswork is the most expensive way to clear a code.
Parts involved
Camera washer actuator cWasher pumpActuator wiring
What each part of B010C means
| B | Body system: airbags, seat belts, power seats, lights and climate control. |
| 0 | Generic code: it means the same on every make (SAE standard). |
| 0C | The exact fault in that area. |
What to do next
- Note B010C and any other codes stored with it: several codes together often point to one cause.
- Check for loose connectors and damaged wiring around the parts the code names.
- Check open recalls for your car: some faults are fixed for free by the dealer. Enter your VIN.
- Clear the code only after the repair. If it comes back, the fault is still there.
Buying a used car? Scan it for stored codes before you pay. A recently cleared memory can hide a problem.
Questions about B010C
What does B010C mean?
B010C means "Camera Washer Actuator C". B010C names actuator C. It is a generic code, so it means the same on every make.
Is it safe to drive with B010C?
B010C does not normally turn on the check engine light by itself. Watch for the symptoms above and have it checked soon.
Will B010C fail an emissions test?
B010C is not an emissions code, so on its own it usually does not fail an emissions test. Other stored codes or a lit check engine light still can.
How hard is B010C to fix?
Difficulty: medium. A typical repair takes 0.5 to 2 hours of work. A careful DIY repair is possible with basic tools and a scanner.
Will B010C clear itself after the repair?
Clear the code with a scanner after the repair. If the fault is fixed, it does not come back.