C060A code meaning
Park Brake Switch Stuck
What C060A means
C060A means the park brake switch reports a state that does not change when it should, or that contradicts itself: a jammed or welded contact, a button held down mechanically, or paired contacts that disagree. EPB buttons carry duplicated contacts for safety; a TRW patent notes that the controller flags an error when the paired signals do not arrive within about 30 ms, and that a blocked actuator can close just one of them. Advics counts apply and release signals seen together as a switch failure, lights a warning lamp and stores a code. Continental's design falls back to a majority vote and, while moving, chooses release over apply. No maker publishes C060A itself. The button may stop working in one or both directions.
C060A at a glance
- Check engine lightUsually not
- Emissions testNot an emissions code
- Limp modeNot expected
- Repair difficultyEasy, DIY possible
- Typical labor0.3 to 1 hours
- Clears after repairWhen cleared with a scanner
Symptoms of C060A
- Park brake warning lamp or message
- Brake does not apply or release from the button
- Code returns right after clearing while the button is untouched
Common causes of C060A
- Most likelyButton jammed by dirt, sticky residue or a broken housing
- PossibleOne contact of the redundant pair welded or worn
- Less likelyObject in the console pressing the button
Check the most likely causes first. Replacing parts by guesswork is the most expensive way to clear a code.
Parts involved
Park brake switchEpb control module
What each part of C060A means
| C | Chassis system: brakes, ABS, steering and suspension. |
| 0 | Generic code: it means the same on every make (SAE standard). |
| 0A | The exact fault in that area. |
What to do next
- Note C060A and any other codes stored with it: several codes together often point to one cause.
- Check for loose connectors and damaged wiring around the parts the code names.
- Check open recalls for your car: some faults are fixed for free by the dealer. Enter your VIN.
- Clear the code only after the repair. If it comes back, the fault is still there.
Buying a used car? Scan it for stored codes before you pay. A recently cleared memory can hide a problem.
Questions about C060A
What does C060A mean?
C060A means "Park Brake Switch Stuck". C060A means the park brake switch reports a state that does not change when it should, or that contradicts itself: a jammed or welded contact, a button held down mechanically, or paired contacts that disagree. It is a generic code, so it means the same on every make.
Is it safe to drive with C060A?
C060A does not normally turn on the check engine light by itself. Watch for the symptoms above and have it checked soon.
Will C060A fail an emissions test?
C060A is not an emissions code, so on its own it usually does not fail an emissions test. Other stored codes or a lit check engine light still can.
How hard is C060A to fix?
Difficulty: easy. A typical repair takes 0.3 to 1 hours of work. A careful DIY repair is possible with basic tools and a scanner.
Will C060A clear itself after the repair?
Clear the code with a scanner after the repair. If the fault is fixed, it does not come back.