C0619 code meaning
Brake Pedal Position Sensor A Offset Exceeded Learning Limit
Chassis system Generic code C06xx codes Check engine light
What C0619 means
Pedal position sensors are taught their rest value, and C0619 says the offset found for channel A lies outside the band the controller will accept. A Hitachi patent on electric boosters learns the stroke sensor zero only with the pedal released and no brake request, and treats a zero beyond a prescribed range as a sensor fault. Mitsubishi's 2023 Outlander PHEV maps C18EE-96 (abnormal stroke sensor value) to C0619, with MIL and brake warnings after two trips; boost, regenerative braking and automatic braking stop. GM's PIT5206D shows the field side: a wiring dropout made the ECM learn 0.61 V instead of about 1 V, so it saw the brake applied. GM relearns after any sensor or module service (16-NA-155).
C0619 at a glance
- Check engine lightYes, usually on
- Emissions testNot an emissions code
- Limp modePossible
- Repair difficultyMedium
- Typical labor0.3 to 1.5 hours
- Clears after repairAfter a drive cycle
Symptoms of C0619
- Brake or brake system warning lamp; check engine lamp on some vehicles
- Brake lights, cruise control or shifting behave as if the pedal were pressed
- Reduced brake assist or regenerative braking on electrified models
Common causes of C0619
- Most likelyIntermittent connection in the sensor circuit that skewed the learned value
- PossiblePedal not returning fully (floor mat, stiff pivot, wrong adjustment)
- PossibleSensor drifted or fitted out of position after replacement
- Less likelyLearn procedure skipped or disturbed after sensor or module service
Check the most likely causes first. Replacing parts by guesswork is the most expensive way to clear a code.
Parts involved
Brake pedal sensor aBrake control module
What each part of C0619 means
| C | Chassis system: brakes, ABS, steering and suspension. |
| 0 | Generic code: it means the same on every make (SAE standard). |
| 19 | The exact fault in that area. |
What to do next
- Note C0619 and any other codes stored with it: several codes together often point to one cause.
- Check for loose connectors and damaged wiring around the parts the code names.
- Check open recalls for your car: some faults are fixed for free by the dealer. Enter your VIN.
- Clear the code only after the repair. If it comes back, the fault is still there.
Buying a used car? Scan it for stored codes before you pay. A recently cleared memory can hide a problem.
Questions about C0619
What does C0619 mean?
C0619 means "Brake Pedal Position Sensor A Offset Exceeded Learning Limit". Pedal position sensors are taught their rest value, and C0619 says the offset found for channel A lies outside the band the controller will accept. It is a generic code, so it means the same on every make.
Is it safe to drive with C0619?
Drive gently and only to a workshop. With C0619 the car can go into limp mode (reduced power) to protect itself.
Will C0619 fail an emissions test?
C0619 is not an emissions code, so on its own it usually does not fail an emissions test. Other stored codes or a lit check engine light still can.
How hard is C0619 to fix?
Difficulty: medium. A typical repair takes 0.3 to 1.5 hours of work. This is a job for a workshop.
Will C0619 clear itself after the repair?
After the repair the car has to complete a drive cycle (a mix of city and highway driving) before the test runs again. Until then the readiness monitor shows "not ready", which can fail an inspection.