P00A6 code meaning
Intake Air Temperature Sensor 2 Circuit Range/Performance Bank 2
Powertrain system Generic code P00xx codes Check engine light
What P00A6 means
Intake air temperature sensor 2 for bank 2 is the second air temperature sensor in the intake path of the second cylinder bank, for example in the intake manifold behind the charge air cooler on engines with two intake paths. For P00A6, this is a plausibility check: at a start after a long standstill the sensor is compared with other temperature sensors (for example coolant temperature or the matching sensor of the other bank), which should then agree. No manufacturer description naming this exact code was found. Bank 2 codes occur only on engines with two separate intake or charge-air paths, one per cylinder bank.
P00A6 at a glance
- Check engine lightYes, usually on
- Emissions testCan fail
- Limp modeNot expected
- Repair difficultyEasy, DIY possible
- Typical labor0.3 to 2 hours
- Clears after repairAfter a drive cycle
Symptoms of P00A6
- Check engine light on
- Usually no noticeable symptoms
- Emissions test or readiness check may fail
Common causes of P00A6
- Most likelySensor drifting or coated with oil or soot
- PossibleContact resistance at the connector
- PossibleComparison sensor faulty
- Less likelyEngine block heater or auxiliary heater distorting the start comparison
Check the most likely causes first. Replacing parts by guesswork is the most expensive way to clear a code.
Parts involved
Intake air temperature sensor 2 bank2Intake air temperature sensor wiring
What each part of P00A6 means
| P | Powertrain system: engine, fuel system, ignition, emissions and transmission. |
| 0 | Generic code: it means the same on every make (SAE standard). |
| 0 | Area: fuel and air metering and auxiliary emission controls. |
| A6 | The exact fault in that area. |
What to do next
- Note P00A6 and any other codes stored with it: several codes together often point to one cause.
- Check for loose connectors and damaged wiring around the parts the code names.
- Check open recalls for your car: some faults are fixed for free by the dealer. Enter your VIN.
- Clear the code only after the repair. If it comes back, the fault is still there.
Buying a used car? Scan it for stored codes before you pay. A recently cleared memory can hide a problem.
Questions about P00A6
What does P00A6 mean?
P00A6 means "Intake Air Temperature Sensor 2 Circuit Range/Performance Bank 2". Intake air temperature sensor 2 for bank 2 is the second air temperature sensor in the intake path of the second cylinder bank, for example in the intake manifold behind the charge air cooler on engines with two intake paths. It is a generic code, so it means the same on every make.
Is it safe to drive with P00A6?
Usually yes, for a short time, if the check engine light is steady and the car drives normally. If the light flashes or the car runs badly, stop and have it checked.
Will P00A6 fail an emissions test?
Yes, it can. P00A6 is emissions-related, so most inspection programs fail a car while it is stored or while the check engine light is on.
How hard is P00A6 to fix?
Difficulty: easy. A typical repair takes 0.3 to 2 hours of work. A careful DIY repair is possible with basic tools and a scanner.
Will P00A6 clear itself after the repair?
After the repair the car has to complete a drive cycle (a mix of city and highway driving) before the test runs again. Until then the readiness monitor shows "not ready", which can fail an inspection.