VinGear VIN decoder VinGearVIN decoder, VIN lookup & history check Check a VIN

P04D0 code meaning

EGR Temperature Sensor C Circuit Low

Powertrain system Generic code P04xx codes Check engine light

What P04D0 means

Exhaust gas recirculation (EGR) routes part of the exhaust back into the intake to lower combustion temperature and NOx. The code standard allows up to four EGR temperature sensors, A to D – for example before and after the cooler, or in the high- and low-pressure circuits; which is which depends on the maker. Sensor C is the third of them, usually an NTC whose low voltage means hot. P04D0 means its signal voltage is below the lower limit – extremely hot, or more often the signal line shorted to ground or the sensor shorted. FCA lists sensor C codes for its part 68142905A (Ram 2014 6.4 and 3.0 litre, Jeep and Dodge 3.6 Pentastar 2016) together with P040B, P0401 and P2457. No threshold is published for sensor C; for sensor B Ford diesels use below 0.19 V and GM diesels below 164 Ω.

P04D0 at a glance

  • Check engine lightYes, usually on
  • Emissions testCan fail
  • Limp modeNot expected
  • Repair difficultyMedium, DIY possible
  • Typical labor0.5 to 1.5 hours
  • Clears after repairAfter a drive cycle

Symptoms of P04D0

  • Check engine light on
  • Usually no change in driving (EGR on a substitute value or off)
  • Possibly EGR flow or cooler codes (P0401, P2457)

Common causes of P04D0

  • Most likelySignal line shorted to ground (chafed hot harness)
  • PossibleSensor shorted internally
  • PossibleMoisture or corrosion in the connector
  • Less likelyEngine module input

Check the most likely causes first. Replacing parts by guesswork is the most expensive way to clear a code.

Parts involved

EGR temperature sensor cSensor wiringEngine control module

What each part of P04D0 means

PPowertrain system: engine, fuel system, ignition, emissions and transmission.
0Generic code: it means the same on every make (SAE standard).
4Area: auxiliary emission controls (catalytic converter, EGR, EVAP).
D0The exact fault in that area.

What to do next

  • Note P04D0 and any other codes stored with it: several codes together often point to one cause.
  • Check for loose connectors and damaged wiring around the parts the code names.
  • Check open recalls for your car: some faults are fixed for free by the dealer. Enter your VIN.
  • Clear the code only after the repair. If it comes back, the fault is still there.

Buying a used car? Scan it for stored codes before you pay. A recently cleared memory can hide a problem.

Questions about P04D0

What does P04D0 mean?

P04D0 means "EGR Temperature Sensor C Circuit Low". Exhaust gas recirculation (EGR) routes part of the exhaust back into the intake to lower combustion temperature and NOx. It is a generic code, so it means the same on every make.

Is it safe to drive with P04D0?

Usually yes, for a short time, if the check engine light is steady and the car drives normally. If the light flashes or the car runs badly, stop and have it checked.

Will P04D0 fail an emissions test?

Yes, it can. P04D0 is emissions-related, so most inspection programs fail a car while it is stored or while the check engine light is on.

How hard is P04D0 to fix?

Difficulty: medium. A typical repair takes 0.5 to 1.5 hours of work. A careful DIY repair is possible with basic tools and a scanner.

Will P04D0 clear itself after the repair?

After the repair the car has to complete a drive cycle (a mix of city and highway driving) before the test runs again. Until then the readiness monitor shows "not ready", which can fail an inspection.

Look up another code

Technical content: OBDex open OBD-II database (public domain, CC0), checked 11 Oct 2026, edited for US drivers by the VinGear team.
Technical sources for P04D0