P05DE code meaning
Brake Pedal Position Sensor B Circuit High
Powertrain system Generic code P05xx codes Check engine light
What P05DE means
Brake-by-wire and hybrid systems use a dual-channel pedal travel sensor; channel B runs opposite to A at Toyota (3.6–4.4 V at rest, falling when pressed), so a common fault of both channels shows up. It feeds brake assist and regenerative blending; CARB requires inputs used by other diagnoses to be monitored. A channel fault blocks the A/B correlation P05E0 and usually limits brake assist or regeneration. P05DE means channel B is above its valid range – an open signal, ground or reference line or a short to positive. Mitsubishi's 2022 Outlander PHEV sets it with the regeneration warning light and the check engine light.
P05DE at a glance
- Check engine lightYes, usually on
- Emissions testCan fail
- Limp modePossible
- Repair difficultyHard
- Typical labor1 to 3 hours
- Clears after repairWhen cleared with a scanner
Symptoms of P05DE
- Brake or regeneration warning light
- Check engine light
- Regeneration or brake assist reduced, pedal feel changed
Common causes of P05DE
- Most likelySignal line B or connector open
- PossibleShared ground or 5 V reference open (sensor A reports too)
- PossiblePedal sensor faulty
- Less likelySignal line B shorted to positive
Check the most likely causes first. Replacing parts by guesswork is the most expensive way to clear a code.
Parts involved
Brake pedal position sensor bSensor wiringBrake control module
What each part of P05DE means
| P | Powertrain system: engine, fuel system, ignition, emissions and transmission. |
| 0 | Generic code: it means the same on every make (SAE standard). |
| 5 | Area: vehicle speed, idle control and auxiliary inputs. |
| DE | The exact fault in that area. |
What to do next
- Note P05DE and any other codes stored with it: several codes together often point to one cause.
- Check for loose connectors and damaged wiring around the parts the code names.
- Check open recalls for your car: some faults are fixed for free by the dealer. Enter your VIN.
- Clear the code only after the repair. If it comes back, the fault is still there.
Buying a used car? Scan it for stored codes before you pay. A recently cleared memory can hide a problem.
Questions about P05DE
What does P05DE mean?
P05DE means "Brake Pedal Position Sensor B Circuit High". Brake-by-wire and hybrid systems use a dual-channel pedal travel sensor; channel B runs opposite to A at Toyota (3.6–4.4 V at rest, falling when pressed), so a common fault of both channels shows up. It is a generic code, so it means the same on every make.
Is it safe to drive with P05DE?
Drive gently and only to a workshop. With P05DE the car can go into limp mode (reduced power) to protect itself.
Will P05DE fail an emissions test?
Yes, it can. P05DE is emissions-related, so most inspection programs fail a car while it is stored or while the check engine light is on.
How hard is P05DE to fix?
Difficulty: hard. A typical repair takes 1 to 3 hours of work. This is a job for a workshop.
Will P05DE clear itself after the repair?
Clear the code with a scanner after the repair. If the fault is fixed, it does not come back.