P07B1 code meaning
Transmission Friction Element H Stuck On
Powertrain system Generic code P07xx codes Check engine light
What P07B1 means
Each friction element (clutch or brake) has three functional codes: slip while commanded locked (P079A ff), performance/stuck off – it does not apply or applies too weakly – and stuck on – it does not release. No manufacturer document available to us uses this code; the documented hybrids have at most five monitored clutches. The description follows the family: when clutch H should release, slip stays below the expected profile. A clutch that does not release ties up the transmission, causing jolts or stalling. Slip of the same clutch is P07A1.
P07B1 at a glance
- Check engine lightYes, usually on
- Emissions testCan fail
- Limp modePossible
- Repair difficultyHard
- Typical labor1 to 12 hours
- Clears after repairWhen cleared with a scanner
Symptoms of P07B1
- Check engine light or 'service hybrid system' message
- Jolt or tie-up on mode or gear changes
- Engine stalls or drags when stopping
- Limp mode with reduced power
Common causes of P07B1
- Most likelyClutch H stuck, welded or piston hanging
- PossibleValve or spool sticking in the applied position
- PossibleContaminated fluid (debris)
- Less likelyModule software
Check the most likely causes first. Replacing parts by guesswork is the most expensive way to clear a code.
Parts involved
Transmission clutchesTransmission valve bodyHybrid control module
What each part of P07B1 means
| P | Powertrain system: engine, fuel system, ignition, emissions and transmission. |
| 0 | Generic code: it means the same on every make (SAE standard). |
| 7 | Area: transmission. |
| B1 | The exact fault in that area. |
What to do next
- Note P07B1 and any other codes stored with it: several codes together often point to one cause.
- Check for loose connectors and damaged wiring around the parts the code names.
- Check open recalls for your car: some faults are fixed for free by the dealer. Enter your VIN.
- Clear the code only after the repair. If it comes back, the fault is still there.
Buying a used car? Scan it for stored codes before you pay. A recently cleared memory can hide a problem.
Questions about P07B1
What does P07B1 mean?
P07B1 means "Transmission Friction Element H Stuck On". Each friction element (clutch or brake) has three functional codes: slip while commanded locked (P079A ff), performance/stuck off – it does not apply or applies too weakly – and stuck on – it does not release. It is a generic code, so it means the same on every make.
Is it safe to drive with P07B1?
Drive gently and only to a workshop. With P07B1 the car can go into limp mode (reduced power) to protect itself.
Will P07B1 fail an emissions test?
Yes, it can. P07B1 is emissions-related, so most inspection programs fail a car while it is stored or while the check engine light is on.
How hard is P07B1 to fix?
Difficulty: hard. A typical repair takes 1 to 12 hours of work. This is a job for a workshop.
Will P07B1 clear itself after the repair?
Clear the code with a scanner after the repair. If the fault is fixed, it does not come back.