P07CE code meaning
Transmission Mode Switch D Circuit
What P07CE means
Transmission mode switches select alternative shift programs such as sport, winter or tow/haul; the J2012 family runs from A (P071A–P071C) and B (P071D–P071F) to C (base code P078F), D and E. No manufacturer document available to us uses switches C to E; GM reads its analog mode switch under its own codes (low below 21–29 % of 5 V, high from 94 %, two trips) and newer drive mode selectors under P05D0–P05D3. P07CE is the general circuit fault of a fourth mode switch D: its state is invalid or implausible. Low and high are P07CF/P07D0.
P07CE at a glance
- Check engine lightUsually not
- Emissions testNot an emissions code
- Limp modeNot expected
- Repair difficultyEasy, DIY possible
- Typical labor0.3 to 1.5 hours
- Clears after repairWhen cleared with a scanner
Symptoms of P07CE
- Mode D cannot be selected or stays active
- Mode indicator missing or flashing
- Transmission stays on the normal program
Common causes of P07CE
- Most likelySwitch or button faulty or sticking
- PossibleWire or connector open or shorted
- PossibleMoisture or dirt in the console
- Less likelyControl module
Check the most likely causes first. Replacing parts by guesswork is the most expensive way to clear a code.
Parts involved
Transmission mode switchSwitch wiringTransmission control module
What each part of P07CE means
| P | Powertrain system: engine, fuel system, ignition, emissions and transmission. |
| 0 | Generic code: it means the same on every make (SAE standard). |
| 7 | Area: transmission. |
| CE | The exact fault in that area. |
What to do next
- Note P07CE and any other codes stored with it: several codes together often point to one cause.
- Check for loose connectors and damaged wiring around the parts the code names.
- Check open recalls for your car: some faults are fixed for free by the dealer. Enter your VIN.
- Clear the code only after the repair. If it comes back, the fault is still there.
Buying a used car? Scan it for stored codes before you pay. A recently cleared memory can hide a problem.
Questions about P07CE
What does P07CE mean?
P07CE means "Transmission Mode Switch D Circuit". Transmission mode switches select alternative shift programs such as sport, winter or tow/haul; the J2012 family runs from A (P071A–P071C) and B (P071D–P071F) to C (base code P078F), D and E. It is a generic code, so it means the same on every make.
Is it safe to drive with P07CE?
P07CE does not normally turn on the check engine light by itself. Watch for the symptoms above and have it checked soon.
Will P07CE fail an emissions test?
P07CE is not an emissions code, so on its own it usually does not fail an emissions test. Other stored codes or a lit check engine light still can.
How hard is P07CE to fix?
Difficulty: easy. A typical repair takes 0.3 to 1.5 hours of work. A careful DIY repair is possible with basic tools and a scanner.
Will P07CE clear itself after the repair?
Clear the code with a scanner after the repair. If the fault is fixed, it does not come back.