P080A code meaning
Clutch Position Not Learned
Powertrain system Generic code P08xx codes Check engine light
What P080A means
The 'Clutch Position Sensor A' family (P0805 circuit to P0809, P080A not learned) means different parts by vehicle generation. GM used P0806–P080A until model year 2018 for the analog clutch pedal sensor of its manual cars, then the newer pedal sensor codes P08A8 ff; Saab's 2012 9-3 does the same. Ford's DPS6 dual clutch uses the family for the electric motor of clutch A. P080A means the learned clutch position is missing or implausible. On GM manual cars the factory learns the pedal position 'clutch fully pressed', and the engine module then tracks it as the clutch wears; a learned value outside 9.0–36.0 % of travel sets the code (250 ms, type A, one trip), a factory counter keeps the MIL off during assembly. Saab clears it by relearning with the scan tool. A relearn is needed after replacing the pedal sensor, master cylinder, clutch or engine module.
P080A at a glance
- Check engine lightYes, usually on
- Emissions testCan fail
- Limp modeNot expected
- Repair difficultyEasy
- Typical labor0.3 to 1 hours
- Clears after repairWhen cleared with a scanner
Symptoms of P080A
- Check engine lamp on
- Start-stop, cruise control or hill start assist disabled
- Engine may start only with the pedal at the stop
Common causes of P080A
- Most likelyRelearn not done after sensor, clutch or module replacement
- PossibleClutch badly worn or misadjusted
- PossiblePedal sensor misadjusted or wrongly fitted
- PossibleEngine module reprogrammed or replaced
Check the most likely causes first. Replacing parts by guesswork is the most expensive way to clear a code.
Parts involved
Clutch position sensorSensor wiringEngine control moduleTransmission control module
What each part of P080A means
| P | Powertrain system: engine, fuel system, ignition, emissions and transmission. |
| 0 | Generic code: it means the same on every make (SAE standard). |
| 8 | Area: transmission. |
| 0A | The exact fault in that area. |
What to do next
- Note P080A and any other codes stored with it: several codes together often point to one cause.
- Check for loose connectors and damaged wiring around the parts the code names.
- Check open recalls for your car: some faults are fixed for free by the dealer. Enter your VIN.
- Clear the code only after the repair. If it comes back, the fault is still there.
Buying a used car? Scan it for stored codes before you pay. A recently cleared memory can hide a problem.
Questions about P080A
What does P080A mean?
P080A means "Clutch Position Not Learned". The 'Clutch Position Sensor A' family (P0805 circuit to P0809, P080A not learned) means different parts by vehicle generation. It is a generic code, so it means the same on every make.
Is it safe to drive with P080A?
Usually yes, for a short time, if the check engine light is steady and the car drives normally. If the light flashes or the car runs badly, stop and have it checked.
Will P080A fail an emissions test?
Yes, it can. P080A is emissions-related, so most inspection programs fail a car while it is stored or while the check engine light is on.
How hard is P080A to fix?
Difficulty: easy. A typical repair takes 0.3 to 1 hours of work. This is a job for a workshop.
Will P080A clear itself after the repair?
Clear the code with a scanner after the repair. If the fault is fixed, it does not come back.