P08CC code meaning
Shift Solenoid J
Powertrain system Generic code P08xx codes Check engine light
What P08CC means
Base code for the tenth on/off shift solenoid of an automatic transmission; which valve gets the letter J is decided by the manufacturer. No manufacturer documents this code publicly. Ford's gasoline OBD summary ends its shift solenoid list at SS E, the Genesis 8-speed bulletin stops at solenoid F, and GM and Toyota label their later valves as pressure control or clutch solenoids, so J stays unused in the known sources. CARB requires automatic transmission solenoids to be checked for functional response and circuit faults. A manufacturer reporting the fault type through a DTC suffix, as Toyota does for pressure control solenoid L, would store such faults under this base code instead of P08CD to P08D4. Expect harsh, missing or substitute-gear shifts.
P08CC at a glance
- Check engine lightYes, usually on
- Emissions testCan fail
- Limp modePossible
- Repair difficultyHard
- Typical labor1 to 6 hours
- Clears after repairWhen cleared with a scanner
Symptoms of P08CC
- Check engine or transmission warning light on
- Harsh, delayed or missing shifts
- Transmission may hold a substitute gear
Common causes of P08CC
- Most likelyShift solenoid J faulty (coil or valve)
- PossibleContaminated or degraded transmission fluid restricting the valve
- PossibleConnector or harness fault between TCM and solenoid
- Less likelyTransmission control module output fault
Check the most likely causes first. Replacing parts by guesswork is the most expensive way to clear a code.
Parts involved
Shift solenoid jValve body
What each part of P08CC means
| P | Powertrain system: engine, fuel system, ignition, emissions and transmission. |
| 0 | Generic code: it means the same on every make (SAE standard). |
| 8 | Area: transmission. |
| CC | The exact fault in that area. |
What to do next
- Note P08CC and any other codes stored with it: several codes together often point to one cause.
- Check for loose connectors and damaged wiring around the parts the code names.
- Check open recalls for your car: some faults are fixed for free by the dealer. Enter your VIN.
- Clear the code only after the repair. If it comes back, the fault is still there.
Buying a used car? Scan it for stored codes before you pay. A recently cleared memory can hide a problem.
Questions about P08CC
What does P08CC mean?
P08CC means "Shift Solenoid J". Base code for the tenth on/off shift solenoid of an automatic transmission; which valve gets the letter J is decided by the manufacturer. It is a generic code, so it means the same on every make.
Is it safe to drive with P08CC?
Drive gently and only to a workshop. With P08CC the car can go into limp mode (reduced power) to protect itself.
Will P08CC fail an emissions test?
Yes, it can. P08CC is emissions-related, so most inspection programs fail a car while it is stored or while the check engine light is on.
How hard is P08CC to fix?
Difficulty: hard. A typical repair takes 1 to 6 hours of work. This is a job for a workshop.
Will P08CC clear itself after the repair?
Clear the code with a scanner after the repair. If the fault is fixed, it does not come back.