P0925 code meaning
Gear Shift Reverse Actuator Circuit Range/Performance
Powertrain system Generic code P09xx codes Check engine light
What P0925 means
Plausibility fault in the drive circuit of the reverse shift actuator of an automated manual gearbox, the actuator that moves the shift mechanism opposite to the forward direction. The circuit is neither open nor shorted, but current, voltage or the resulting shift movement do not match the command. No manufacturer documents this code publicly. A Hyundai/Kia patent detects jammed shift actuators from rising motor current, and a ZF patent shows double-acting shift cylinders with one solenoid valve per chamber, so each direction can be judged on its own. CARB requires functional checks on such outputs. P0924, P0926 and P0927 are the clear electrical faults, P0921 the forward direction, P0919 the missed target. Shifts in this direction become slow or fail.
P0925 at a glance
- Check engine lightYes, usually on
- Emissions testCan fail
- Limp modePossible
- Repair difficultyHard
- Typical labor1 to 5 hours
- Clears after repairAfter a drive cycle
Symptoms of P0925
- Transmission warning light on
- Slow, harsh or aborted gear changes in one direction
- Fallback mode with fewer available gears
Common causes of P0925
- Most likelySticking shift valve, worn shift motor or stiff shift linkage
- PossibleSolenoid or motor resistance out of specification
- PossibleIncreased contact resistance in connector or wiring
- Less likelyInsufficient hydraulic pressure on hydraulic units
Check the most likely causes first. Replacing parts by guesswork is the most expensive way to clear a code.
Parts involved
Gear shift reverse actuatorWiring harnessTCM
What each part of P0925 means
| P | Powertrain system: engine, fuel system, ignition, emissions and transmission. |
| 0 | Generic code: it means the same on every make (SAE standard). |
| 9 | Area: transmission. |
| 25 | The exact fault in that area. |
What to do next
- Note P0925 and any other codes stored with it: several codes together often point to one cause.
- Check for loose connectors and damaged wiring around the parts the code names.
- Check open recalls for your car: some faults are fixed for free by the dealer. Enter your VIN.
- Clear the code only after the repair. If it comes back, the fault is still there.
Buying a used car? Scan it for stored codes before you pay. A recently cleared memory can hide a problem.
Questions about P0925
What does P0925 mean?
P0925 means "Gear Shift Reverse Actuator Circuit Range/Performance". Plausibility fault in the drive circuit of the reverse shift actuator of an automated manual gearbox, the actuator that moves the shift mechanism opposite to the forward direction. It is a generic code, so it means the same on every make.
Is it safe to drive with P0925?
Drive gently and only to a workshop. With P0925 the car can go into limp mode (reduced power) to protect itself.
Will P0925 fail an emissions test?
Yes, it can. P0925 is emissions-related, so most inspection programs fail a car while it is stored or while the check engine light is on.
How hard is P0925 to fix?
Difficulty: hard. A typical repair takes 1 to 5 hours of work. This is a job for a workshop.
Will P0925 clear itself after the repair?
After the repair the car has to complete a drive cycle (a mix of city and highway driving) before the test runs again. Until then the readiness monitor shows "not ready", which can fail an inspection.