P0982 code meaning
Shift Solenoid D Control Circuit Low
Powertrain system Generic code P09xx codes Check engine light
What P0982 means
Low-voltage fault, in practice a short to ground, in the control circuit of shift solenoid D. Ford is the documented user: its summaries list SSD with P0765 open, P0982 short to ground and P0983 short to power, checked continuously through the driver feedback within 0.5 to 5 s. Which clutch this hits depends on the gearbox. In the 6R80 and 6F, SSD is a variable force solenoid feeding CBLR or C456 via the SSE multiplex valve; in the 6R140 it drives CBLR alone. In the 2023 diesel summary SSD is fed from supply TSPC2 with SSB, the converter clutch and line pressure solenoid. GM's six-speed and Allison tables do not use P0982. Ferrari reuses it for an actuator 3 sensor reading too low.
P0982 at a glance
- Check engine lightYes, usually on
- Emissions testCan fail
- Limp modePossible
- Repair difficultyHard
- Typical labor1 to 5 hours
- Clears after repairWhen cleared with a scanner
Symptoms of P0982
- MIL on and default gear operation
- No engine braking in first or no reverse, depending on gearbox
- Harsh shifts into upper gears
Common causes of P0982
- Most likelySolenoid D control wire shorted to ground
- PossibleInternal short in solenoid D or the main control assembly
- PossibleDamaged internal lead frame or connector inside the transmission
- Less likelyFaulty driver in the powertrain or transmission module
Check the most likely causes first. Replacing parts by guesswork is the most expensive way to clear a code.
Parts involved
Shift solenoid dWiring harnessTCM
What each part of P0982 means
| P | Powertrain system: engine, fuel system, ignition, emissions and transmission. |
| 0 | Generic code: it means the same on every make (SAE standard). |
| 9 | Area: transmission. |
| 82 | The exact fault in that area. |
What to do next
- Note P0982 and any other codes stored with it: several codes together often point to one cause.
- Check for loose connectors and damaged wiring around the parts the code names.
- Check open recalls for your car: some faults are fixed for free by the dealer. Enter your VIN.
- Clear the code only after the repair. If it comes back, the fault is still there.
Buying a used car? Scan it for stored codes before you pay. A recently cleared memory can hide a problem.
Questions about P0982
What does P0982 mean?
P0982 means "Shift Solenoid D Control Circuit Low". Low-voltage fault, in practice a short to ground, in the control circuit of shift solenoid D. It is a generic code, so it means the same on every make.
Is it safe to drive with P0982?
Drive gently and only to a workshop. With P0982 the car can go into limp mode (reduced power) to protect itself.
Will P0982 fail an emissions test?
Yes, it can. P0982 is emissions-related, so most inspection programs fail a car while it is stored or while the check engine light is on.
How hard is P0982 to fix?
Difficulty: hard. A typical repair takes 1 to 5 hours of work. This is a job for a workshop.
Will P0982 clear itself after the repair?
Clear the code with a scanner after the repair. If the fault is fixed, it does not come back.