P0BEE code meaning
Drive Motor A Phase W Current Sensor Circuit Range/Performance
Powertrain system Generic code P0Bxx codes Check engine light
What P0BEE means
P0BEE checks the phase W current sensor of the motor A inverter for a plausible zero point. GM learns the sensor offset at each start while no current flows and sets the code above 30 A (2011 Volt and 2016 tables, Type A; 2012 two-mode trucks, Type B) or above 35 A (2019 table, Type A). In GM's BAS Plus (eAssist) table P0BEE is one of the faults that switch current control to a sensorless alternate mode, and it blocks the phase sum check P0BFD. Jeep lists P0BEE as Drive Motor A Inverter Phase W Current Sensor Circuit Performance on the 2020 Renegade and Compass 1.3 PHEV (EMEA), with turtle and Service 4WD lights, fixed by a hybrid control processor update.
P0BEE at a glance
- Check engine lightYes, usually on
- Emissions testCan fail
- Limp modePossible
- Repair difficultyWorkshop only
- Typical labor0.5 to 6 hours
- Clears after repairWhen cleared with a scanner
Symptoms of P0BEE
- Malfunction indicator lamp
- Turtle (limp home) light and Service 4WD light (Jeep)
- Reduced electric drive power
Common causes of P0BEE
- Most likelyHybrid control processor software (Jeep bulletin 08-056-21/08-057-21)
- PossibleZero offset of the phase W current sensor drifted beyond the limit
- PossibleFaulty sensing electronics in the power inverter module
Check the most likely causes first. Replacing parts by guesswork is the most expensive way to clear a code.
Parts involved
Drive motor a phase w current sensorWiring harnessHybrid control module
What each part of P0BEE means
| P | Powertrain system: engine, fuel system, ignition, emissions and transmission. |
| 0 | Generic code: it means the same on every make (SAE standard). |
| B | Area: hybrid propulsion. |
| EE | The exact fault in that area. |
What to do next
- Note P0BEE and any other codes stored with it: several codes together often point to one cause.
- Check for loose connectors and damaged wiring around the parts the code names.
- Check open recalls for your car: some faults are fixed for free by the dealer. Enter your VIN.
- Clear the code only after the repair. If it comes back, the fault is still there.
Buying a used car? Scan it for stored codes before you pay. A recently cleared memory can hide a problem.
Questions about P0BEE
What does P0BEE mean?
P0BEE means "Drive Motor A Phase W Current Sensor Circuit Range/Performance". P0BEE checks the phase W current sensor of the motor A inverter for a plausible zero point. It is a generic code, so it means the same on every make.
Is it safe to drive with P0BEE?
Drive gently and only to a workshop. With P0BEE the car can go into limp mode (reduced power) to protect itself.
Will P0BEE fail an emissions test?
Yes, it can. P0BEE is emissions-related, so most inspection programs fail a car while it is stored or while the check engine light is on.
How hard is P0BEE to fix?
Difficulty: workshop only. A typical repair takes 0.5 to 6 hours of work. This is a job for a workshop.
Will P0BEE clear itself after the repair?
Clear the code with a scanner after the repair. If the fault is fixed, it does not come back.