P0C60 code meaning
Drive Motor B Position Sensor Circuit B Range/Performance
Powertrain system Generic code P0Cxx codes Check engine light
What P0C60 means
P0C60 indicates that the second winding of the motor B resolver (Circuit B) is electrically intact but delivers values the controller rejects as unrealistic, for example an amplitude that no longer agrees with the first winding or an angle that jumps against the measured speed. No manufacturer documents this code publicly. The idea behind it is the separate rationality test that CARB demands for input sensors, apart from circuit and range checks. Practical suspects are contact resistance at the plug, a resolver stator that has moved or been damaged, and stray coupling from the high-voltage phase cables onto a poorly shielded line. P0C61 to P0C63 cover low, high and sporadic Circuit B faults, P0A46 the combined signal.
P0C60 at a glance
- Check engine lightYes, usually on
- Emissions testCan fail
- Limp modePossible
- Repair difficultyWorkshop only
- Typical labor1.5 to 6 hours
- Clears after repairWhen cleared with a scanner
Symptoms of P0C60
- Hybrid system warning with check engine lamp
- Motor B output limited
- Vibration or noise when motor B is under load
Common causes of P0C60
- Most likelyRaised contact resistance at the motor B resolver connector
- PossibleMotor B resolver stator shifted or damaged
- Less likelyInterference from the high-voltage phase cables through a damaged shield
Check the most likely causes first. Replacing parts by guesswork is the most expensive way to clear a code.
Parts involved
Drive motor b position sensor bWiring harnessHybrid control module
What each part of P0C60 means
| P | Powertrain system: engine, fuel system, ignition, emissions and transmission. |
| 0 | Generic code: it means the same on every make (SAE standard). |
| C | Area: hybrid propulsion. |
| 60 | The exact fault in that area. |
What to do next
- Note P0C60 and any other codes stored with it: several codes together often point to one cause.
- Check for loose connectors and damaged wiring around the parts the code names.
- Check open recalls for your car: some faults are fixed for free by the dealer. Enter your VIN.
- Clear the code only after the repair. If it comes back, the fault is still there.
Buying a used car? Scan it for stored codes before you pay. A recently cleared memory can hide a problem.
Questions about P0C60
What does P0C60 mean?
P0C60 means "Drive Motor B Position Sensor Circuit B Range/Performance". P0C60 indicates that the second winding of the motor B resolver (Circuit B) is electrically intact but delivers values the controller rejects as unrealistic, for example an amplitude that no longer agrees with the first winding or an angle that jumps against the measured speed. It is a generic code, so it means the same on every make.
Is it safe to drive with P0C60?
Drive gently and only to a workshop. With P0C60 the car can go into limp mode (reduced power) to protect itself.
Will P0C60 fail an emissions test?
Yes, it can. P0C60 is emissions-related, so most inspection programs fail a car while it is stored or while the check engine light is on.
How hard is P0C60 to fix?
Difficulty: workshop only. A typical repair takes 1.5 to 6 hours of work. This is a job for a workshop.
Will P0C60 clear itself after the repair?
Clear the code with a scanner after the repair. If the fault is fixed, it does not come back.