P0C69 code meaning
Generator Position Sensor Circuit B
Powertrain system Generic code P0Cxx codes Check engine light
What P0C69 means
P0C69 is the general fault entry for the second pickup winding of the generator resolver. A resolver needs both windings, set 90 degrees apart, to give an unambiguous rotor angle; with only one, the inverter can no longer place the current in the generator phases correctly. The code applies when circuit B is judged faulty but not classified further. No manufacturer documents P0C69 publicly. At Mitsubishi on the 2023 Outlander PHEV circuit B corresponds to the cosine winding, and that design reports it only through the low and high codes P0C6B and P0C6C. CARB's hybrid rules require the generator to be monitored under an approved plan and circuit faults of input components to be detected. P0C64 is the same entry for circuit A.
P0C69 at a glance
- Check engine lightYes, usually on
- Emissions testCan fail
- Limp modePossible
- Repair difficultyWorkshop only
- Typical labor1 to 10 hours
- Clears after repairWhen cleared with a scanner
Symptoms of P0C69
- Hybrid warning or malfunction indicator lamp
- Generator switched off, battery is no longer recharged by the engine
- Limited driving power
Common causes of P0C69
- Most likelyOpen or damaged lead in the second resolver pickup winding circuit
- PossibleBent, corroded or pushed-back pins at the resolver connector
- PossibleFaulty second pickup winding in the resolver stator
- Less likelyInternal fault in the generator control electronics
Check the most likely causes first. Replacing parts by guesswork is the most expensive way to clear a code.
Parts involved
Generator position sensor bWiring harnessHybrid control module
What each part of P0C69 means
| P | Powertrain system: engine, fuel system, ignition, emissions and transmission. |
| 0 | Generic code: it means the same on every make (SAE standard). |
| C | Area: hybrid propulsion. |
| 69 | The exact fault in that area. |
What to do next
- Note P0C69 and any other codes stored with it: several codes together often point to one cause.
- Check for loose connectors and damaged wiring around the parts the code names.
- Check open recalls for your car: some faults are fixed for free by the dealer. Enter your VIN.
- Clear the code only after the repair. If it comes back, the fault is still there.
Buying a used car? Scan it for stored codes before you pay. A recently cleared memory can hide a problem.
Questions about P0C69
What does P0C69 mean?
P0C69 means "Generator Position Sensor Circuit B". P0C69 is the general fault entry for the second pickup winding of the generator resolver. It is a generic code, so it means the same on every make.
Is it safe to drive with P0C69?
Drive gently and only to a workshop. With P0C69 the car can go into limp mode (reduced power) to protect itself.
Will P0C69 fail an emissions test?
Yes, it can. P0C69 is emissions-related, so most inspection programs fail a car while it is stored or while the check engine light is on.
How hard is P0C69 to fix?
Difficulty: workshop only. A typical repair takes 1 to 10 hours of work. This is a job for a workshop.
Will P0C69 clear itself after the repair?
Clear the code with a scanner after the repair. If the fault is fixed, it does not come back.