P0CDD code meaning
Drive Motor A Position Sensor Circuit C High
Powertrain system Generic code P0Cxx codes Check engine light
What P0CDD means
P0CDD indicates that circuit C of the drive motor A position sensor reads above its limit, which in general points to an open winding, a disconnected plug or a short to a voltage source. Subaru uses the code in the drive motor control module of the 2014 XV Crosstrek Hybrid. Bulletin 07-82-14R explains that P0CDD together with P0A3F could be stored whenever the 12 V auxiliary battery sagged below specified limits; the module then requests the MIL via P0CA1 in the engine controller, and C1424 appears in the stability control unit. The remedy is reprogramming the module with revised logic, which production adopted in January 2014. On such cars check the 12 V battery and software first. Electric drive is usually limited while the fault is active. The low counterpart is P0CDC.
P0CDD at a glance
- Check engine lightYes, usually on
- Emissions testCan fail
- Limp modePossible
- Repair difficultyHard
- Typical labor0.4 to 6 hours
- Clears after repairWhen cleared with a scanner
Symptoms of P0CDD
- MIL on (requested via P0CA1 on Subaru)
- Hybrid system warning, electric assist missing
Common causes of P0CDD
- Most likely12 V auxiliary battery voltage dips with outdated module logic (Subaru)
- PossibleOpen winding, broken wire or disconnected resolver plug
- Less likelyCircuit C wire shorted to a voltage source
Check the most likely causes first. Replacing parts by guesswork is the most expensive way to clear a code.
Parts involved
Drive motor a position sensor cWiring harnessHybrid control module
What each part of P0CDD means
| P | Powertrain system: engine, fuel system, ignition, emissions and transmission. |
| 0 | Generic code: it means the same on every make (SAE standard). |
| C | Area: hybrid propulsion. |
| DD | The exact fault in that area. |
What to do next
- Note P0CDD and any other codes stored with it: several codes together often point to one cause.
- Check for loose connectors and damaged wiring around the parts the code names.
- Check open recalls for your car: some faults are fixed for free by the dealer. Enter your VIN.
- Clear the code only after the repair. If it comes back, the fault is still there.
Buying a used car? Scan it for stored codes before you pay. A recently cleared memory can hide a problem.
Questions about P0CDD
What does P0CDD mean?
P0CDD means "Drive Motor A Position Sensor Circuit C High". P0CDD indicates that circuit C of the drive motor A position sensor reads above its limit, which in general points to an open winding, a disconnected plug or a short to a voltage source. It is a generic code, so it means the same on every make.
Is it safe to drive with P0CDD?
Drive gently and only to a workshop. With P0CDD the car can go into limp mode (reduced power) to protect itself.
Will P0CDD fail an emissions test?
Yes, it can. P0CDD is emissions-related, so most inspection programs fail a car while it is stored or while the check engine light is on.
How hard is P0CDD to fix?
Difficulty: hard. A typical repair takes 0.4 to 6 hours of work. This is a job for a workshop.
Will P0CDD clear itself after the repair?
Clear the code with a scanner after the repair. If the fault is fixed, it does not come back.