P0DEE code meaning
Pedestrian Alert Control Module Circuit Low
What P0DEE means
P0DEE is set when the hard-wired circuit to the pedestrian alert control module sits below its expected voltage, typically from a short to ground. No manufacturer documents P0DEE publicly, so the exact signal behind it, whether supply, wake-up or a command line, is not known in detail. A ground short often blows a fuse or makes the driving module disconnect the line, and the alert then falls silent, even though FMVSS 141 expects a sound from standstill with propulsion on, in reverse and up to around 30 km/h; EU vehicles must carry such a system as well. Look along the whole harness run, which can be long: on Ford's 2020-21 Escape Hybrid the module sits in the right rear quarter. Open circuit is P0DED, short to voltage P0DEF.
P0DEE at a glance
- Check engine lightUsually not
- Emissions testNot an emissions code
- Limp modeNot expected
- Repair difficultyMedium, DIY possible
- Typical labor0.5 to 2.5 hours
- Clears after repairWhen cleared with a scanner
Symptoms of P0DEE
- Pedestrian warning sound missing
- Warning message in the instrument cluster
- Fuse for the alert module may be blown
Common causes of P0DEE
- Most likelyChafed or crushed wire shorting to ground
- PossibleWater ingress in a connector near bumper or wheel arch
- Less likelyInternal short in the alert module
Check the most likely causes first. Replacing parts by guesswork is the most expensive way to clear a code.
Parts involved
Pedestrian alert control moduleWiring harness
What each part of P0DEE means
| P | Powertrain system: engine, fuel system, ignition, emissions and transmission. |
| 0 | Generic code: it means the same on every make (SAE standard). |
| EE | The exact fault in that area. |
What to do next
- Note P0DEE and any other codes stored with it: several codes together often point to one cause.
- Check for loose connectors and damaged wiring around the parts the code names.
- Check open recalls for your car: some faults are fixed for free by the dealer. Enter your VIN.
- Clear the code only after the repair. If it comes back, the fault is still there.
Buying a used car? Scan it for stored codes before you pay. A recently cleared memory can hide a problem.
Questions about P0DEE
What does P0DEE mean?
P0DEE means "Pedestrian Alert Control Module Circuit Low". P0DEE is set when the hard-wired circuit to the pedestrian alert control module sits below its expected voltage, typically from a short to ground. It is a generic code, so it means the same on every make.
Is it safe to drive with P0DEE?
P0DEE does not normally turn on the check engine light by itself. Watch for the symptoms above and have it checked soon.
Will P0DEE fail an emissions test?
P0DEE is not an emissions code, so on its own it usually does not fail an emissions test. Other stored codes or a lit check engine light still can.
How hard is P0DEE to fix?
Difficulty: medium. A typical repair takes 0.5 to 2.5 hours of work. A careful DIY repair is possible with basic tools and a scanner.
Will P0DEE clear itself after the repair?
Clear the code with a scanner after the repair. If the fault is fixed, it does not come back.