P0FFF code meaning
Not Documented - No Defined Meaning
What P0FFF means
P0FFF has no documented meaning. CARB requires the SAE J2012-defined codes such as P0xxx and P2xxx wherever possible and allows manufacturer-defined codes only in the ranges J2012 sets aside for them, such as P1xxx. None of the public J2012 title lists checked for obdex assigns a code in the P0Fxx block, and no vehicle maker, regulator filing or bulletin in the NHTSA archive uses P0FFF. If a scan tool reports P0FFF, the likely causes are a reading error, a tool with a faulty code table or a maker-specific code shown with the wrong prefix; check the raw data and the manufacturer's own code list.
P0FFF at a glance
- Check engine lightUsually not
- Emissions testNot an emissions code
- Limp modeNot expected
- Clears after repairWhen cleared with a scanner
What each part of P0FFF means
| P | Powertrain system: engine, fuel system, ignition, emissions and transmission. |
| 0 | Generic code: it means the same on every make (SAE standard). |
| FF | The exact fault in that area. |
What to do next
- Note P0FFF and any other codes stored with it: several codes together often point to one cause.
- Check for loose connectors and damaged wiring around the parts the code names.
- Check open recalls for your car: some faults are fixed for free by the dealer. Enter your VIN.
- Clear the code only after the repair. If it comes back, the fault is still there.
Buying a used car? Scan it for stored codes before you pay. A recently cleared memory can hide a problem.
Questions about P0FFF
What does P0FFF mean?
P0FFF means "Not Documented - No Defined Meaning". P0FFF has no documented meaning. It is a generic code, so it means the same on every make.
Is it safe to drive with P0FFF?
P0FFF does not normally turn on the check engine light by itself. Watch for the symptoms above and have it checked soon.
Will P0FFF fail an emissions test?
P0FFF is not an emissions code, so on its own it usually does not fail an emissions test. Other stored codes or a lit check engine light still can.
Will P0FFF clear itself after the repair?
Clear the code with a scanner after the repair. If the fault is fixed, it does not come back.