P2132 code meaning
Throttle/Pedal Position Sensor/Switch F Circuit Low
What P2132 means
P2132 sets when signal F drops below its lower voltage limit. Ford uses it for the third accelerator pedal track of its second-generation electronic throttle: its 2012 OBD summary treats anything under 0.25 V as a continuity fault and lights only the wrench lamp, not the MIL. FCA's emissions recall T21 for the 2004-2006 Dodge Sprinter lists P2132 among the codes that may appear after the engine control unit is reprogrammed. GM's TACM trucks of 2004-2005 fold low readings of sensor 3 into the general code P2130. Likely causes are a short to ground on the F signal, an open 5 V feed or wear at the closed end of the track. P2133 is the high fault on F, P2122 and P2127 the low faults on tracks D and E.
P2132 at a glance
- Check engine lightUsually not
- Emissions testCan fail
- Limp modePossible
- Repair difficultyEasy, DIY possible
- Typical labor0.3 to 1.5 hours
- Clears after repairWhen cleared with a scanner
Symptoms of P2132
- Wrench or engine warning lamp on
- Delayed or rate-limited acceleration
- Idle may stay raised until the brake is pressed
Common causes of P2132
- Most likelySignal wire of track F shorted to ground
- PossibleOpen or weak 5 V reference to the pedal sensor
- PossibleTrack F worn at the rest position
Check the most likely causes first. Replacing parts by guesswork is the most expensive way to clear a code.
Parts involved
Throttle position sensorAccelerator pedal position sensorPedal sensor wiring
What each part of P2132 means
| P | Powertrain system: engine, fuel system, ignition, emissions and transmission. |
| 2 | Generic code (second SAE range): it means the same on every make. |
| 1 | Area: fuel and air metering. |
| 32 | The exact fault in that area. |
What to do next
- Note P2132 and any other codes stored with it: several codes together often point to one cause.
- Check for loose connectors and damaged wiring around the parts the code names.
- Check open recalls for your car: some faults are fixed for free by the dealer. Enter your VIN.
- Clear the code only after the repair. If it comes back, the fault is still there.
Buying a used car? Scan it for stored codes before you pay. A recently cleared memory can hide a problem.
Questions about P2132
What does P2132 mean?
P2132 means "Throttle/Pedal Position Sensor/Switch F Circuit Low". P2132 sets when signal F drops below its lower voltage limit. It is a generic code, so it means the same on every make.
Is it safe to drive with P2132?
Drive gently and only to a workshop. With P2132 the car can go into limp mode (reduced power) to protect itself.
Will P2132 fail an emissions test?
Yes, it can. P2132 is emissions-related, so most inspection programs fail a car while it is stored or while the check engine light is on.
How hard is P2132 to fix?
Difficulty: easy. A typical repair takes 0.3 to 1.5 hours of work. A careful DIY repair is possible with basic tools and a scanner.
Will P2132 clear itself after the repair?
Clear the code with a scanner after the repair. If the fault is fixed, it does not come back.