P2167 code meaning
Throttle/Pedal Position Sensor E Maximum Stop Performance
Powertrain system Generic code P21xx codes Check engine light
What P2167 means
P2167 checks position signal E at maximum travel; on designs that call the pedal tracks D, E and F, E is the second pedal sensor. The code sets when E, with the pedal fully down, reports a value outside the accepted band. Because the second track usually has a different characteristic from the first, checking D and E side by side at full pedal reveals whether only E is off or the pedal itself is blocked. No manufacturer documents P2167 publicly; the logic mirrors P2163, which Ford lists, and the open-stop learning in a Visteon patent. Wear near the far end of the E track, contact corrosion in the pedal connector or an obstructed pedal are likely causes. P2116 covers the rest position of E, P2125-P2129 its circuit, P2138 the D/E check.
P2167 at a glance
- Check engine lightYes, usually on
- Emissions testCan fail
- Limp modePossible
- Repair difficultyEasy, DIY possible
- Typical labor0.2 to 1 hours
- Clears after repairWhen cleared with a scanner
Symptoms of P2167
- Engine warning lamp on
- Limited power with the pedal fully pressed
- Possible limp mode
Common causes of P2167
- Most likelyPedal sensor track E worn at the full-travel end
- PossibleContact corrosion in the pedal connector
- PossiblePedal cannot reach its stop (mat, object, bent bracket)
Check the most likely causes first. Replacing parts by guesswork is the most expensive way to clear a code.
Parts involved
Accelerator pedal position sensorThrottle position sensor
What each part of P2167 means
| P | Powertrain system: engine, fuel system, ignition, emissions and transmission. |
| 2 | Generic code (second SAE range): it means the same on every make. |
| 1 | Area: fuel and air metering. |
| 67 | The exact fault in that area. |
What to do next
- Note P2167 and any other codes stored with it: several codes together often point to one cause.
- Check for loose connectors and damaged wiring around the parts the code names.
- Check open recalls for your car: some faults are fixed for free by the dealer. Enter your VIN.
- Clear the code only after the repair. If it comes back, the fault is still there.
Buying a used car? Scan it for stored codes before you pay. A recently cleared memory can hide a problem.
Questions about P2167
What does P2167 mean?
P2167 means "Throttle/Pedal Position Sensor E Maximum Stop Performance". P2167 checks position signal E at maximum travel; on designs that call the pedal tracks D, E and F, E is the second pedal sensor. It is a generic code, so it means the same on every make.
Is it safe to drive with P2167?
Drive gently and only to a workshop. With P2167 the car can go into limp mode (reduced power) to protect itself.
Will P2167 fail an emissions test?
Yes, it can. P2167 is emissions-related, so most inspection programs fail a car while it is stored or while the check engine light is on.
How hard is P2167 to fix?
Difficulty: easy. A typical repair takes 0.2 to 1 hours of work. A careful DIY repair is possible with basic tools and a scanner.
Will P2167 clear itself after the repair?
Clear the code with a scanner after the repair. If the fault is fixed, it does not come back.