P2380 code meaning
EGR Sensor D Circuit
Powertrain system Generic code P23xx codes Check engine light
What P2380 means
P2380 is the general circuit code for EGR sensor D. Which sensor carries the letter D is up to the maker. Ford's 2024–2025 gasoline OBD summary assigns it to the EGRP sensor, a smart EGR pressure sensor with a digital output covering 0.1 to 408.8 kPa: P2380 is stored when the sensor itself reports an internal malfunction, checked continuously while the EGR monitor runs, with 5 seconds to register the fault; a lost or corrupted data link sets U0669 instead. GM's 2025 diesel tables, by contrast, give its sensor D only the specific codes P2381 to P2384. CARB requires input components used by the EGR monitor to be checked for circuit faults. With the code stored the EGR flow check is not trustworthy and EGR may be cut back; the engine usually runs normally.
P2380 at a glance
- Check engine lightYes, usually on
- Emissions testCan fail
- Limp modeNot expected
- Repair difficultyMedium, DIY possible
- Typical labor0.3 to 1.5 hours
- Clears after repairWhen cleared with a scanner
Symptoms of P2380
- Check engine light on
- EGR monitor not completed
- Possibly slight knock tendency or higher NOx with EGR reduced
Common causes of P2380
- Most likelyInternal fault reported by the smart EGR pressure sensor
- PossibleCorroded or loose connector at the sensor
- Less likelyUnstable supply or ground to the sensor
Check the most likely causes first. Replacing parts by guesswork is the most expensive way to clear a code.
Parts involved
EGR sensor d
What each part of P2380 means
| P | Powertrain system: engine, fuel system, ignition, emissions and transmission. |
| 2 | Generic code (second SAE range): it means the same on every make. |
| 3 | Area: ignition system or misfire. |
| 80 | The exact fault in that area. |
What to do next
- Note P2380 and any other codes stored with it: several codes together often point to one cause.
- Check for loose connectors and damaged wiring around the parts the code names.
- Check open recalls for your car: some faults are fixed for free by the dealer. Enter your VIN.
- Clear the code only after the repair. If it comes back, the fault is still there.
Buying a used car? Scan it for stored codes before you pay. A recently cleared memory can hide a problem.
Questions about P2380
What does P2380 mean?
P2380 means "EGR Sensor D Circuit". P2380 is the general circuit code for EGR sensor D. It is a generic code, so it means the same on every make.
Is it safe to drive with P2380?
Usually yes, for a short time, if the check engine light is steady and the car drives normally. If the light flashes or the car runs badly, stop and have it checked.
Will P2380 fail an emissions test?
Yes, it can. P2380 is emissions-related, so most inspection programs fail a car while it is stored or while the check engine light is on.
How hard is P2380 to fix?
Difficulty: medium. A typical repair takes 0.3 to 1.5 hours of work. A careful DIY repair is possible with basic tools and a scanner.
Will P2380 clear itself after the repair?
Clear the code with a scanner after the repair. If the fault is fixed, it does not come back.