P28C7 code meaning
Clutch A Motor Phase U-V-W Performance
Powertrain system Generic code P28xx codes Check engine light
What P28C7 means
P28C7 flags that the clutch A motor's phases are electrically intact but the motor does not respond as expected, e.g. currents and rotation do not match the commanded drive. Stellantis documents it in bulletin 21-040-26 (May 2026) for European 2022-2025 Jeep Renegade and Compass with the 1.5 MHEV engine and the 7HDT300 hybrid dual-clutch gearbox: together with P2787 it points to the actuator cylinder of the odd-gear clutch, which in this gearbox is clutch A. Cause given there is small debris in the transmission blocking a pump inside the actuator; the MIL comes on and odd gears may be lost. If the guided test fails, the actuator is replaced (1.5 labour hours). The even-gear counterpart is P28D5 with P27F3.
P28C7 at a glance
- Check engine lightYes, usually on
- Emissions testCan fail
- Limp modePossible
- Repair difficultyHard
- Typical labor1 to 3 hours
- Clears after repairWhen cleared with a scanner
Symptoms of P28C7
- MIL and transmission warning lamp on
- Odd gears unavailable on the 7HDT300
- Often stored together with clutch A temperature code P2787
Common causes of P28C7
- Most likelyDebris from the transmission jamming the pump in the clutch A actuator (Stellantis 7HDT300)
- PossibleWorn or sluggish clutch A actuator motor
- Less likelyIncreased resistance in a phase connection causing unbalanced currents
Check the most likely causes first. Replacing parts by guesswork is the most expensive way to clear a code.
Parts involved
Clutch motor aWiring harnessTCM
What each part of P28C7 means
| P | Powertrain system: engine, fuel system, ignition, emissions and transmission. |
| 2 | Generic code (second SAE range): it means the same on every make. |
| 8 | Area: transmission. |
| C7 | The exact fault in that area. |
What to do next
- Note P28C7 and any other codes stored with it: several codes together often point to one cause.
- Check for loose connectors and damaged wiring around the parts the code names.
- Check open recalls for your car: some faults are fixed for free by the dealer. Enter your VIN.
- Clear the code only after the repair. If it comes back, the fault is still there.
Buying a used car? Scan it for stored codes before you pay. A recently cleared memory can hide a problem.
Questions about P28C7
What does P28C7 mean?
P28C7 means "Clutch A Motor Phase U-V-W Performance". P28C7 flags that the clutch A motor's phases are electrically intact but the motor does not respond as expected, e.g. It is a generic code, so it means the same on every make.
Is it safe to drive with P28C7?
Drive gently and only to a workshop. With P28C7 the car can go into limp mode (reduced power) to protect itself.
Will P28C7 fail an emissions test?
Yes, it can. P28C7 is emissions-related, so most inspection programs fail a car while it is stored or while the check engine light is on.
How hard is P28C7 to fix?
Difficulty: hard. A typical repair takes 1 to 3 hours of work. This is a job for a workshop.
Will P28C7 clear itself after the repair?
Clear the code with a scanner after the repair. If the fault is fixed, it does not come back.