P2E96 code meaning
Charge Port Door B Open Request Switch Circuit High
What P2E96 means
P2E96 is stored when the request signal of charge flap B climbs past the top of its permitted range. Contact with a 12 V supply raises it, and so does a broken sensor ground or switch path that lets a pulled-up input float. The control unit then usually sees a request that never arrives. No manufacturer documents P2E96 publicly. GM's Volt table for flap A sets the matching P0CCA when readings pass 94.5 percent in 6 out of 8 cases, Type B. On Porsche's Taycan each flap can be moved both from the centre console and by the touch-free sensor; bulletin 186/24 has technicians test both ways on both sides and check lines and plug connections before replacing parts. Low readings are P2E95, the invalid middle band P2E93.
P2E96 at a glance
- Check engine lightUsually not
- Emissions testNot an emissions code
- Limp modeNot expected
- Repair difficultyMedium
- Typical labor0.5 to 2.5 hours
- Clears after repairWhen cleared with a scanner
Symptoms of P2E96
- Flap B never reacts to the hand or touch
- Opening from the centre console or display still works
- Warning that the charging flap is impaired
Common causes of P2E96
- Most likelySensor signal wire shorted to a 12 V supply
- PossibleInterrupted ground or switch path at the flap B sensor
- PossiblePushed-back or loose pin in the flap module connector
Check the most likely causes first. Replacing parts by guesswork is the most expensive way to clear a code.
Parts involved
Charge port door b request switchWiring harnessControl module
What each part of P2E96 means
| P | Powertrain system: engine, fuel system, ignition, emissions and transmission. |
| 2 | Generic code (second SAE range): it means the same on every make. |
| 96 | The exact fault in that area. |
What to do next
- Note P2E96 and any other codes stored with it: several codes together often point to one cause.
- Check for loose connectors and damaged wiring around the parts the code names.
- Check open recalls for your car: some faults are fixed for free by the dealer. Enter your VIN.
- Clear the code only after the repair. If it comes back, the fault is still there.
Buying a used car? Scan it for stored codes before you pay. A recently cleared memory can hide a problem.
Questions about P2E96
What does P2E96 mean?
P2E96 means "Charge Port Door B Open Request Switch Circuit High". P2E96 is stored when the request signal of charge flap B climbs past the top of its permitted range. It is a generic code, so it means the same on every make.
Is it safe to drive with P2E96?
P2E96 does not normally turn on the check engine light by itself. Watch for the symptoms above and have it checked soon.
Will P2E96 fail an emissions test?
P2E96 is not an emissions code, so on its own it usually does not fail an emissions test. Other stored codes or a lit check engine light still can.
How hard is P2E96 to fix?
Difficulty: medium. A typical repair takes 0.5 to 2.5 hours of work. This is a job for a workshop.
Will P2E96 clear itself after the repair?
Clear the code with a scanner after the repair. If the fault is fixed, it does not come back.