U060D code meaning
Lost Communication With Turbocharger/Supercharger Boost Sensor C
Network system Generic code U06xx codes Check engine light
What U060D means
A third boost sensor C appears only on complex charging layouts, for instance sequential or two-stage turbo systems with pressure taps between and after the stages, or engines that add an electric compressor. U060D reports that the controller has lost the digital link to this sensor: no SENT frame inside the expected time, a frame failing its check, or a sensor that transmits only its reserved error value, a feature found on pressure chips such as Melexis' MLX90818. No manufacturer documents U060D publicly, so its use rests on the CARB 1968.2 requirement and the pattern of U060B. Which physical sensor is called C is a manufacturer decision. P25F2 to P25F5 cover the analog circuit of the same sensor. Expect boost to be limited on the affected stage.
U060D at a glance
- Check engine lightYes, usually on
- Emissions testCan fail
- Limp modePossible
- Repair difficultyMedium, DIY possible
- Typical labor0.5 to 2 hours
- Clears after repairWhen cleared with a scanner
Symptoms of U060D
- Check engine light
- Power loss when the affected stage would build boost
Common causes of U060D
- Most likelyOpen or shorted SENT, supply or ground wire to sensor C
- PossibleSensor C sending only its error value
- Less likelyCorroded connector at sensor C
Check the most likely causes first. Replacing parts by guesswork is the most expensive way to clear a code.
Parts involved
Boost pressure sensor cSensor wiring
What each part of U060D means
| U | Network system: communication between the control modules (CAN bus). |
| 0 | Generic code: it means the same on every make (SAE standard). |
| 0D | The exact fault in that area. |
What to do next
- Note U060D and any other codes stored with it: several codes together often point to one cause.
- Check for loose connectors and damaged wiring around the parts the code names.
- Check open recalls for your car: some faults are fixed for free by the dealer. Enter your VIN.
- Clear the code only after the repair. If it comes back, the fault is still there.
Buying a used car? Scan it for stored codes before you pay. A recently cleared memory can hide a problem.
Questions about U060D
What does U060D mean?
U060D means "Lost Communication With Turbocharger/Supercharger Boost Sensor C". A third boost sensor C appears only on complex charging layouts, for instance sequential or two-stage turbo systems with pressure taps between and after the stages, or engines that add an electric compressor. It is a generic code, so it means the same on every make.
Is it safe to drive with U060D?
Drive gently and only to a workshop. With U060D the car can go into limp mode (reduced power) to protect itself.
Will U060D fail an emissions test?
Yes, it can. U060D is emissions-related, so most inspection programs fail a car while it is stored or while the check engine light is on.
How hard is U060D to fix?
Difficulty: medium. A typical repair takes 0.5 to 2 hours of work. A careful DIY repair is possible with basic tools and a scanner.
Will U060D clear itself after the repair?
Clear the code with a scanner after the repair. If the fault is fixed, it does not come back.