B0113 code meaning
Camera Washer Actuator K
What B0113 means
B0113 names actuator K. Even a working actuator is useless if the jet misses the lens. Stellantis TSB 23-049-22 Rev. A for 2022–2023 Jeep Grand Cherokee (WL) built between 13 April and 15 September 2022 found the liftgate nozzle of the digital rearview mirror camera pointing the wrong way; it is unclipped, turned 180 degrees and refitted, after which the mirror is reset by holding its plus and minus buttons for about 15 s. Bowles' application US20140060582A1 explains the geometry: a nozzle offset roughly 10 to 30 mm beside the lens, aimed within about 1 to 20 degrees of its surface and kept out of the field of view. A misaimed jet sets no code; B0113 concerns the actuator circuit, for a camera that is not published.
B0113 at a glance
- Check engine lightUsually not
- Emissions testNot an emissions code
- Limp modeNot expected
- Repair difficultyMedium, DIY possible
- Typical labor0.3 to 1.5 hours
- Clears after repairWhen cleared with a scanner
Symptoms of B0113
- Camera wash does not run for the camera served by actuator K
- Digital mirror or reversing picture stays dirty after the wash is requested
Common causes of B0113
- Most likelyOpen or short in the circuit of valve or pump K
- PossibleWire fatigue in the liftgate hinge area
- Less likelyPlug not reconnected after the camera or nozzle was removed
Check the most likely causes first. Replacing parts by guesswork is the most expensive way to clear a code.
Parts involved
Camera washer actuator kRear cameraActuator wiring
What each part of B0113 means
| B | Body system: airbags, seat belts, power seats, lights and climate control. |
| 0 | Generic code: it means the same on every make (SAE standard). |
| 13 | The exact fault in that area. |
What to do next
- Note B0113 and any other codes stored with it: several codes together often point to one cause.
- Check for loose connectors and damaged wiring around the parts the code names.
- Check open recalls for your car: some faults are fixed for free by the dealer. Enter your VIN.
- Clear the code only after the repair. If it comes back, the fault is still there.
Buying a used car? Scan it for stored codes before you pay. A recently cleared memory can hide a problem.
Questions about B0113
What does B0113 mean?
B0113 means "Camera Washer Actuator K". B0113 names actuator K. It is a generic code, so it means the same on every make.
Is it safe to drive with B0113?
B0113 does not normally turn on the check engine light by itself. Watch for the symptoms above and have it checked soon.
Will B0113 fail an emissions test?
B0113 is not an emissions code, so on its own it usually does not fail an emissions test. Other stored codes or a lit check engine light still can.
How hard is B0113 to fix?
Difficulty: medium. A typical repair takes 0.3 to 1.5 hours of work. A careful DIY repair is possible with basic tools and a scanner.
Will B0113 clear itself after the repair?
Clear the code with a scanner after the repair. If the fault is fixed, it does not come back.