B0114 code meaning
Camera Washer Actuator L
What B0114 means
B0114 covers actuator L. Stellantis STAR case S2123000051 (2021, Jeep Grand Cherokee) describes a front camera washer pump that stopped spraying when the reservoir ran low although the cluster showed no low-fluid warning; a new pump, reservoir or level sensor did not help, and engineering was still investigating. Ford's German application DE102018109892A1 shows a quite different actuator: a magnet that squeezes a flexible chamber next to the camera, with one-way valves at inlet and outlet, triggered at ignition on, in reverse or by the wiper lever, plus an optional float reporting a low level. Washer level codes form their own row from B011C. Which camera L serves is not published; no maker documents B0114.
B0114 at a glance
- Check engine lightUsually not
- Emissions testNot an emissions code
- Limp modeNot expected
- Repair difficultyMedium, DIY possible
- Typical labor0.2 to 1.5 hours
- Clears after repairWhen cleared with a scanner
Symptoms of B0114
- Camera wash stops working while the reservoir is low, without a low-fluid warning
- Front camera view remains dirty after a wash request
Common causes of B0114
- Most likelyPump or actuator L damaged after running with a nearly empty reservoir
- PossibleOpen or shorted wiring to actuator L
- Less likelyLevel sensor not warning in time, so the actuator runs without fluid
Check the most likely causes first. Replacing parts by guesswork is the most expensive way to clear a code.
Parts involved
Camera washer actuator lWasher pumpActuator wiring
What each part of B0114 means
| B | Body system: airbags, seat belts, power seats, lights and climate control. |
| 0 | Generic code: it means the same on every make (SAE standard). |
| 14 | The exact fault in that area. |
What to do next
- Note B0114 and any other codes stored with it: several codes together often point to one cause.
- Check for loose connectors and damaged wiring around the parts the code names.
- Check open recalls for your car: some faults are fixed for free by the dealer. Enter your VIN.
- Clear the code only after the repair. If it comes back, the fault is still there.
Buying a used car? Scan it for stored codes before you pay. A recently cleared memory can hide a problem.
Questions about B0114
What does B0114 mean?
B0114 means "Camera Washer Actuator L". B0114 covers actuator L. It is a generic code, so it means the same on every make.
Is it safe to drive with B0114?
B0114 does not normally turn on the check engine light by itself. Watch for the symptoms above and have it checked soon.
Will B0114 fail an emissions test?
B0114 is not an emissions code, so on its own it usually does not fail an emissions test. Other stored codes or a lit check engine light still can.
How hard is B0114 to fix?
Difficulty: medium. A typical repair takes 0.2 to 1.5 hours of work. A careful DIY repair is possible with basic tools and a scanner.
Will B0114 clear itself after the repair?
Clear the code with a scanner after the repair. If the fault is fixed, it does not come back.