P060D code meaning
Internal Control Module Accelerator Pedal Position Performance
Powertrain system Generic code P06xx codes Check engine light
What P060D means
The accelerator pedal has two sensor tracks. With P060D the module's own cross-check of the pedal value fails: two processors (GM: main and 'motor' processor) calculate pedal position independently and must agree, and an active test briefly pulls one track to ground – the other must not follow, otherwise the tracks are shorted together. Thresholds: GM 2005 difference over 0.142 V or track 2 over 2.05 V during the test; GM 2006 over 5 %; Ford diesel compares track 1 against twice track 2 (half slope), fault above 547 or 1055 mV for 5 s. GM sets it in the first trip, Ford since 2020 with the check engine and wrench lamps (2012 only the wrench lamp). Unlike P2138, where the two pedal tracks disagree outside the module, P060D is the internal plausibility check.
P060D at a glance
- Check engine lightYes, usually on
- Emissions testCan fail
- Limp modePossible
- Repair difficultyMedium
- Typical labor0.5 to 3 hours
- Clears after repairWhen cleared with a scanner
Symptoms of P060D
- Reduced power, engine barely responds to the pedal
- Check engine light or wrench lamp
- Cruise control disabled
- Raised idle or limp mode
Common causes of P060D
- Most likelyShort between the two pedal sensor signal lines or moisture in the pedal connector
- PossibleFaulty pedal sensor (tracks drifting)
- PossibleFaulty module software (update available)
- Less likelyInternal module fault (converter, processor)
Check the most likely causes first. Replacing parts by guesswork is the most expensive way to clear a code.
Parts involved
Engine control moduleAccelerator pedal position sensorSensor wiring
What each part of P060D means
| P | Powertrain system: engine, fuel system, ignition, emissions and transmission. |
| 0 | Generic code: it means the same on every make (SAE standard). |
| 6 | Area: computer (engine control module) and output circuits. |
| 0D | The exact fault in that area. |
What to do next
- Note P060D and any other codes stored with it: several codes together often point to one cause.
- Check for loose connectors and damaged wiring around the parts the code names.
- Check open recalls for your car: some faults are fixed for free by the dealer. Enter your VIN.
- Clear the code only after the repair. If it comes back, the fault is still there.
Buying a used car? Scan it for stored codes before you pay. A recently cleared memory can hide a problem.
Questions about P060D
What does P060D mean?
P060D means "Internal Control Module Accelerator Pedal Position Performance". The accelerator pedal has two sensor tracks. It is a generic code, so it means the same on every make.
Is it safe to drive with P060D?
Drive gently and only to a workshop. With P060D the car can go into limp mode (reduced power) to protect itself.
Will P060D fail an emissions test?
Yes, it can. P060D is emissions-related, so most inspection programs fail a car while it is stored or while the check engine light is on.
How hard is P060D to fix?
Difficulty: medium. A typical repair takes 0.5 to 3 hours of work. This is a job for a workshop.
Will P060D clear itself after the repair?
Clear the code with a scanner after the repair. If the fault is fixed, it does not come back.