P060E code meaning
Internal Control Module Throttle Position Performance
Powertrain system Generic code P06xx codes Check engine light
What P060E means
P060E is the throttle counterpart of P060D. The throttle body also has two position sensor tracks, and the module checks whether it can still detect a short between them: during an active test one track is influenced briefly, and the second processor (GM 'motor processor') confirms that the test actually ran. GM 2005 sets the code when track 2 exceeds 1.75 V during the test or no test activity is seen for 500 ms, GM 2006 at 2.05 V or 498 ms, each after two counts of about 155 ms, with the lamp in the first trip; GM Europe rates it type C with reduced power. Ford does not use P060E. The throttle opening is limited or set to its default position. External disagreement between the two tracks is P2135; circuit faults of single tracks are P0120–P0123 and P0220–P0223.
P060E at a glance
- Check engine lightYes, usually on
- Emissions testCan fail
- Limp modePossible
- Repair difficultyMedium
- Typical labor0.5 to 3 hours
- Clears after repairWhen cleared with a scanner
Symptoms of P060E
- Reduced power
- Check engine light (GM) or service lamp (GM Europe)
- Hesitant or jerky throttle response
- Cruise control not working
Common causes of P060E
- Most likelyShort between the throttle sensor signal lines or moisture in the throttle connector
- PossibleFaulty throttle body (sensor)
- PossibleInternal module fault (test circuit, second processor)
- Less likelyFaulty module software (update available)
Check the most likely causes first. Replacing parts by guesswork is the most expensive way to clear a code.
Parts involved
Engine control moduleThrottle bodySensor wiring
What each part of P060E means
| P | Powertrain system: engine, fuel system, ignition, emissions and transmission. |
| 0 | Generic code: it means the same on every make (SAE standard). |
| 6 | Area: computer (engine control module) and output circuits. |
| 0E | The exact fault in that area. |
What to do next
- Note P060E and any other codes stored with it: several codes together often point to one cause.
- Check for loose connectors and damaged wiring around the parts the code names.
- Check open recalls for your car: some faults are fixed for free by the dealer. Enter your VIN.
- Clear the code only after the repair. If it comes back, the fault is still there.
Buying a used car? Scan it for stored codes before you pay. A recently cleared memory can hide a problem.
Questions about P060E
What does P060E mean?
P060E means "Internal Control Module Throttle Position Performance". P060E is the throttle counterpart of P060D. It is a generic code, so it means the same on every make.
Is it safe to drive with P060E?
Drive gently and only to a workshop. With P060E the car can go into limp mode (reduced power) to protect itself.
Will P060E fail an emissions test?
Yes, it can. P060E is emissions-related, so most inspection programs fail a car while it is stored or while the check engine light is on.
How hard is P060E to fix?
Difficulty: medium. A typical repair takes 0.5 to 3 hours of work. This is a job for a workshop.
Will P060E clear itself after the repair?
Clear the code with a scanner after the repair. If the fault is fixed, it does not come back.