P075D code meaning
Shift Solenoid G Electrical
Powertrain system Generic code P07xx codes Check engine light
What P075D means
Shift solenoid G only exists on transmissions with seven or more solenoids. Ford's 10R80 and 8F35 use solenoids A–F, GM's 9- and 10-speeds report clutch pressure valve codes, the Allison 1000 uses three; the only documented user of the G block is Hyundai/Genesis' 8-speed, which assigns P075A and P075D to its on/off solenoids. Hyundai's bulletins for the G80 and G90 (2017–18) use P075D for the on/off solenoid 'D (PRH)' – the abbreviation is not explained – in connection with shift-by-wire and the park position switch. The remedy given is replacing valve and electronic module and loading the valve data.
P075D at a glance
- Check engine lightYes, usually on
- Emissions testCan fail
- Limp modePossible
- Repair difficultyMedium
- Typical labor1 to 4 hours
- Clears after repairWhen cleared with a scanner
Symptoms of P075D
- Check engine light
- Limp mode or shift fault
- Possibly park lock or shift-by-wire fault
Common causes of P075D
- Most likelySolenoid faulty
- PossibleElectronic module or internal harness
- PossibleConnector or wiring
Check the most likely causes first. Replacing parts by guesswork is the most expensive way to clear a code.
Parts involved
On off solenoidTransmission electronic moduleTransmission wiringTransmission control module
What each part of P075D means
| P | Powertrain system: engine, fuel system, ignition, emissions and transmission. |
| 0 | Generic code: it means the same on every make (SAE standard). |
| 7 | Area: transmission. |
| 5D | The exact fault in that area. |
What to do next
- Note P075D and any other codes stored with it: several codes together often point to one cause.
- Check for loose connectors and damaged wiring around the parts the code names.
- Check open recalls for your car: some faults are fixed for free by the dealer. Enter your VIN.
- Clear the code only after the repair. If it comes back, the fault is still there.
Buying a used car? Scan it for stored codes before you pay. A recently cleared memory can hide a problem.
Questions about P075D
What does P075D mean?
P075D means "Shift Solenoid G Electrical". Shift solenoid G only exists on transmissions with seven or more solenoids. It is a generic code, so it means the same on every make.
Is it safe to drive with P075D?
Drive gently and only to a workshop. With P075D the car can go into limp mode (reduced power) to protect itself.
Will P075D fail an emissions test?
Yes, it can. P075D is emissions-related, so most inspection programs fail a car while it is stored or while the check engine light is on.
How hard is P075D to fix?
Difficulty: medium. A typical repair takes 1 to 4 hours of work. This is a job for a workshop.
Will P075D clear itself after the repair?
Clear the code with a scanner after the repair. If the fault is fixed, it does not come back.