P07ED code meaning
Transmission Range Multi-Function Select Circuit Stuck
Powertrain system Generic code P07xx codes Check engine light
What P07ED means
'Transmission Range Multi-Function Select' is the multi-bit code of the shift-by-wire selector position: each position produces a fixed pattern of sensor states, and the module checks the pattern for logic errors. Mitsubishi's 2022 CVT with electric shift uses eight sensors (R: 1–2 on, N toward R: 1–5, home: all, N toward D: 4–8, D/M: 7–8). P07ED is the step after P07EC: at least two bits are stuck, so the position can no longer be decoded reliably. Mitsubishi then puts the drive in neutral and blocks changes between P, R, N and D, lights the MIL and the red or yellow shift warning; the car cannot be driven and has to be towed.
P07ED at a glance
- Check engine lightYes, usually on
- Emissions testNot an emissions code
- Limp modePossible
- Repair difficultyMedium
- Typical labor0.5 to 2.5 hours
- Clears after repairWhen cleared with a scanner
Symptoms of P07ED
- No range can be selected, vehicle in neutral
- MIL and red or yellow shift warning
- Vehicle cannot be driven (tow)
Common causes of P07ED
- Most likelySelector sensor board faulty
- PossibleSelector connector corroded or loose (several pins)
- Less likelyLiquid spilled into the center console
Check the most likely causes first. Replacing parts by guesswork is the most expensive way to clear a code.
Parts involved
Electronic range selectorSelector position sensorsSwitch wiringShift by wire module
What each part of P07ED means
| P | Powertrain system: engine, fuel system, ignition, emissions and transmission. |
| 0 | Generic code: it means the same on every make (SAE standard). |
| 7 | Area: transmission. |
| ED | The exact fault in that area. |
What to do next
- Note P07ED and any other codes stored with it: several codes together often point to one cause.
- Check for loose connectors and damaged wiring around the parts the code names.
- Check open recalls for your car: some faults are fixed for free by the dealer. Enter your VIN.
- Clear the code only after the repair. If it comes back, the fault is still there.
Buying a used car? Scan it for stored codes before you pay. A recently cleared memory can hide a problem.
Questions about P07ED
What does P07ED mean?
P07ED means "Transmission Range Multi-Function Select Circuit Stuck". 'Transmission Range Multi-Function Select' is the multi-bit code of the shift-by-wire selector position: each position produces a fixed pattern of sensor states, and the module checks the pattern for logic errors. It is a generic code, so it means the same on every make.
Is it safe to drive with P07ED?
Drive gently and only to a workshop. With P07ED the car can go into limp mode (reduced power) to protect itself.
Will P07ED fail an emissions test?
P07ED is not an emissions code, so on its own it usually does not fail an emissions test. Other stored codes or a lit check engine light still can.
How hard is P07ED to fix?
Difficulty: medium. A typical repair takes 0.5 to 2.5 hours of work. This is a job for a workshop.
Will P07ED clear itself after the repair?
Clear the code with a scanner after the repair. If the fault is fixed, it does not come back.