P07EE code meaning
Transmission Range Multi-Function Select Circuit Range/Performance
Powertrain system Generic code P07xx codes Check engine light
What P07EE means
'Transmission Range Multi-Function Select' is the multi-bit code of the shift-by-wire selector position: each position produces a fixed pattern of sensor states, and the module checks the pattern for logic errors. Mitsubishi's 2022 CVT with electric shift uses eight sensors (R: 1–2 on, N toward R: 1–5, home: all, N toward D: 4–8, D/M: 7–8). P07EE is the range and plausibility fault of the position code; Mitsubishi assigns it solely to the electric shift module itself – the pattern fits no position or contradicts itself. A generic scan tool shows the fault as P0914 'Gear Shift Position Circuit A'. Shifting is blocked, the drive goes to neutral and the MIL comes on; the usual repair is a software update or the module.
P07EE at a glance
- Check engine lightYes, usually on
- Emissions testNot an emissions code
- Limp modePossible
- Repair difficultyHard
- Typical labor0.5 to 3 hours
- Clears after repairWhen cleared with a scanner
Symptoms of P07EE
- Vehicle goes to neutral, shifting blocked
- MIL and shift warning
- Generic scan tool shows P0914
Common causes of P07EE
- Most likelyElectric shift module faulty (hardware or software)
- PossibleOutdated module software
- Less likelySelector or harness
Check the most likely causes first. Replacing parts by guesswork is the most expensive way to clear a code.
Parts involved
Shift by wire moduleElectronic range selectorSwitch wiring
What each part of P07EE means
| P | Powertrain system: engine, fuel system, ignition, emissions and transmission. |
| 0 | Generic code: it means the same on every make (SAE standard). |
| 7 | Area: transmission. |
| EE | The exact fault in that area. |
What to do next
- Note P07EE and any other codes stored with it: several codes together often point to one cause.
- Check for loose connectors and damaged wiring around the parts the code names.
- Check open recalls for your car: some faults are fixed for free by the dealer. Enter your VIN.
- Clear the code only after the repair. If it comes back, the fault is still there.
Buying a used car? Scan it for stored codes before you pay. A recently cleared memory can hide a problem.
Questions about P07EE
What does P07EE mean?
P07EE means "Transmission Range Multi-Function Select Circuit Range/Performance". 'Transmission Range Multi-Function Select' is the multi-bit code of the shift-by-wire selector position: each position produces a fixed pattern of sensor states, and the module checks the pattern for logic errors. It is a generic code, so it means the same on every make.
Is it safe to drive with P07EE?
Drive gently and only to a workshop. With P07EE the car can go into limp mode (reduced power) to protect itself.
Will P07EE fail an emissions test?
P07EE is not an emissions code, so on its own it usually does not fail an emissions test. Other stored codes or a lit check engine light still can.
How hard is P07EE to fix?
Difficulty: hard. A typical repair takes 0.5 to 3 hours of work. This is a job for a workshop.
Will P07EE clear itself after the repair?
Clear the code with a scanner after the repair. If the fault is fixed, it does not come back.