P092B code meaning
Gear Shift Lock Solenoid/Actuator Control Circuit B Range/Performance
What P092B means
Set when the actuator on shift lock circuit B is wired correctly but does not reach or report the commanded lock or release state. No manufacturer documents this code publicly. The closest documented case is Ford P0929 on circuit A, where the gear shift module logs that the commanded position was not reached and the cure is new GSM software or a new module. CARB asks for a functional check of output components where feasible. GHSP patents show that a shifter can carry a second lock solenoid, for instance a Neutral lock. P092A, P092C and P092D are the open, low and high faults of circuit B, P0929 the matching fault on circuit A. The lever may stay locked, or the lock may engage late.
P092B at a glance
- Check engine lightUsually not
- Emissions testNot an emissions code
- Limp modeNot expected
- Repair difficultyMedium
- Typical labor0.5 to 2 hours
- Clears after repairWhen cleared with a scanner
Symptoms of P092B
- Lever releases late or only after several tries
- Lever stays locked in one position
- Transmission or wrench warning lamp on
Common causes of P092B
- Most likelyLock pin or actuator binding inside the shifter assembly
- PossibleShifter module software misjudging the actuator response
- Less likelyWeak battery or poor supply leaving the solenoid too little force
Check the most likely causes first. Replacing parts by guesswork is the most expensive way to clear a code.
Parts involved
Gear shift lock solenoid bWiring harnessTCM
What each part of P092B means
| P | Powertrain system: engine, fuel system, ignition, emissions and transmission. |
| 0 | Generic code: it means the same on every make (SAE standard). |
| 9 | Area: transmission. |
| 2B | The exact fault in that area. |
What to do next
- Note P092B and any other codes stored with it: several codes together often point to one cause.
- Check for loose connectors and damaged wiring around the parts the code names.
- Check open recalls for your car: some faults are fixed for free by the dealer. Enter your VIN.
- Clear the code only after the repair. If it comes back, the fault is still there.
Buying a used car? Scan it for stored codes before you pay. A recently cleared memory can hide a problem.
Questions about P092B
What does P092B mean?
P092B means "Gear Shift Lock Solenoid/Actuator Control Circuit B Range/Performance". Set when the actuator on shift lock circuit B is wired correctly but does not reach or report the commanded lock or release state. It is a generic code, so it means the same on every make.
Is it safe to drive with P092B?
P092B does not normally turn on the check engine light by itself. Watch for the symptoms above and have it checked soon.
Will P092B fail an emissions test?
P092B is not an emissions code, so on its own it usually does not fail an emissions test. Other stored codes or a lit check engine light still can.
How hard is P092B to fix?
Difficulty: medium. A typical repair takes 0.5 to 2 hours of work. This is a job for a workshop.
Will P092B clear itself after the repair?
Clear the code with a scanner after the repair. If the fault is fixed, it does not come back.