P0E06 code meaning
Generator Phase V Current Sensor Circuit Low
Powertrain system Generic code P0Exx codes Check engine light
What P0E06 means
P0E06 means the phase V current sensor of the generator inverter delivers a signal at the floor of its range. The 2023 Outlander PHEV is the only documented user: Mitsubishi's generator control unit, running on 8 V or more, stores P0E06-00 when the V-phase voltage remains at 0.5 V or below for 0.2 s, and the MIL comes on. Electrically this fits an interrupted signal or supply line or a signal shorted to ground, which is how Mitsubishi's older chart explains the matching U-phase fault. On this model the sensor is integrated in the power module, so the official remedy after a confirming test drive is a new unit. The older Outlander PHEV has no V-phase sensor and therefore never sets P0E06. Related: P0E05 (offset) and P0E07 (signal high).
P0E06 at a glance
- Check engine lightYes, usually on
- Emissions testCan fail
- Limp modePossible
- Repair difficultyWorkshop only
- Typical labor1 to 5 hours
- Clears after repairWhen cleared with a scanner
Symptoms of P0E06
- MIL and hybrid system warning light on
- Generator power limited
Common causes of P0E06
- Most likelyV-phase sensor signal shorted to ground or sensor failed low
- PossibleOpen sensor signal or supply inside the power drive unit
- Less likelyInput of the generator control unit faulty
Check the most likely causes first. Replacing parts by guesswork is the most expensive way to clear a code.
Parts involved
Generator phase v current sensorWiring harnessHybrid control module
What each part of P0E06 means
| P | Powertrain system: engine, fuel system, ignition, emissions and transmission. |
| 0 | Generic code: it means the same on every make (SAE standard). |
| 06 | The exact fault in that area. |
What to do next
- Note P0E06 and any other codes stored with it: several codes together often point to one cause.
- Check for loose connectors and damaged wiring around the parts the code names.
- Check open recalls for your car: some faults are fixed for free by the dealer. Enter your VIN.
- Clear the code only after the repair. If it comes back, the fault is still there.
Buying a used car? Scan it for stored codes before you pay. A recently cleared memory can hide a problem.
Questions about P0E06
What does P0E06 mean?
P0E06 means "Generator Phase V Current Sensor Circuit Low". P0E06 means the phase V current sensor of the generator inverter delivers a signal at the floor of its range. It is a generic code, so it means the same on every make.
Is it safe to drive with P0E06?
Drive gently and only to a workshop. With P0E06 the car can go into limp mode (reduced power) to protect itself.
Will P0E06 fail an emissions test?
Yes, it can. P0E06 is emissions-related, so most inspection programs fail a car while it is stored or while the check engine light is on.
How hard is P0E06 to fix?
Difficulty: workshop only. A typical repair takes 1 to 5 hours of work. This is a job for a workshop.
Will P0E06 clear itself after the repair?
Clear the code with a scanner after the repair. If the fault is fixed, it does not come back.