B010F code meaning
Camera Washer Actuator F
What B010F means
B010F covers actuator F. On 2021 Chevrolet Tahoe and Suburban and GMC Yukon with the rear camera mirror (RPO DRZ), GM service update N202311260 found the hose feeding the rear camera nozzle kinked behind the tailgate trim in about 630 vehicles; technicians test the wash, shorten the hose to 127 mm at most and slide an 85 mm split sleeve over it. A kink starves the nozzle without any electrical fault, so it would not explain B010F; the code points to the actuator circuit. The camera itself falls under FMVSS 111, which demands a rearview image within 2.0 s of selecting reverse and tests external camera parts for corrosion and humidity, yet sets no rule for a washer. Which camera F means is not published; no maker documents B010F.
B010F at a glance
- Check engine lightUsually not
- Emissions testNot an emissions code
- Limp modeNot expected
- Repair difficultyMedium, DIY possible
- Typical labor0.3 to 1.5 hours
- Clears after repairWhen cleared with a scanner
Symptoms of B010F
- Camera mirror or reversing image stays dirty because the rear camera wash does not work
- Rearview image itself is still shown when reversing
Common causes of B010F
- Most likelyOpen or shorted circuit to valve or pump F
- PossibleWiring pinched or unplugged during tailgate trim removal
- Less likelyActuator F itself defective
Check the most likely causes first. Replacing parts by guesswork is the most expensive way to clear a code.
Parts involved
Camera washer actuator fRear cameraActuator wiring
What each part of B010F means
| B | Body system: airbags, seat belts, power seats, lights and climate control. |
| 0 | Generic code: it means the same on every make (SAE standard). |
| 0F | The exact fault in that area. |
What to do next
- Note B010F and any other codes stored with it: several codes together often point to one cause.
- Check for loose connectors and damaged wiring around the parts the code names.
- Check open recalls for your car: some faults are fixed for free by the dealer. Enter your VIN.
- Clear the code only after the repair. If it comes back, the fault is still there.
Buying a used car? Scan it for stored codes before you pay. A recently cleared memory can hide a problem.
Questions about B010F
What does B010F mean?
B010F means "Camera Washer Actuator F". B010F covers actuator F. It is a generic code, so it means the same on every make.
Is it safe to drive with B010F?
B010F does not normally turn on the check engine light by itself. Watch for the symptoms above and have it checked soon.
Will B010F fail an emissions test?
B010F is not an emissions code, so on its own it usually does not fail an emissions test. Other stored codes or a lit check engine light still can.
How hard is B010F to fix?
Difficulty: medium. A typical repair takes 0.3 to 1.5 hours of work. A careful DIY repair is possible with basic tools and a scanner.
Will B010F clear itself after the repair?
Clear the code with a scanner after the repair. If the fault is fixed, it does not come back.