B0110 code meaning
Camera Washer Actuator G
What B0110 means
B0110 names actuator G. Not every washed camera sees visible light. Bentley's product information 2051045 (2023) concerns the infrared night-vision camera in the front bumper of Bentayga, Continental GT/GTC and Flying Spur: fluid dripping from its washer jet is cured by a new non-return valve, and the camera needs recalibrating only if it is replaced itself. An earlier note (2021) replaced the short link hose between that jet and its supply connector instead. Valeo's cleaning range likewise lists infrared cameras next to visible cameras and lidar. Whether G stands for a night-vision camera is not published, and no manufacturer documents B0110. If set, the night-vision image may blur in rain or slush.
B0110 at a glance
- Check engine lightUsually not
- Emissions testNot an emissions code
- Limp modeNot expected
- Repair difficultyMedium
- Typical labor0.5 to 2.5 hours
- Clears after repairWhen cleared with a scanner
Symptoms of B0110
- Night-vision or front camera image stays smeared; the camera jet does not spray
- Assistance functions relying on that camera may report limited availability
Common causes of B0110
- Most likelyValve or pump G for the camera jet electrically open or shorted
- PossibleHarness damage in the lower bumper area after a parking knock or repair
- Less likelyOutput stage of the controlling module defective
Check the most likely causes first. Replacing parts by guesswork is the most expensive way to clear a code.
Parts involved
Camera washer actuator gNight visionActuator wiring
What each part of B0110 means
| B | Body system: airbags, seat belts, power seats, lights and climate control. |
| 0 | Generic code: it means the same on every make (SAE standard). |
| 10 | The exact fault in that area. |
What to do next
- Note B0110 and any other codes stored with it: several codes together often point to one cause.
- Check for loose connectors and damaged wiring around the parts the code names.
- Check open recalls for your car: some faults are fixed for free by the dealer. Enter your VIN.
- Clear the code only after the repair. If it comes back, the fault is still there.
Buying a used car? Scan it for stored codes before you pay. A recently cleared memory can hide a problem.
Questions about B0110
What does B0110 mean?
B0110 means "Camera Washer Actuator G". B0110 names actuator G. It is a generic code, so it means the same on every make.
Is it safe to drive with B0110?
B0110 does not normally turn on the check engine light by itself. Watch for the symptoms above and have it checked soon.
Will B0110 fail an emissions test?
B0110 is not an emissions code, so on its own it usually does not fail an emissions test. Other stored codes or a lit check engine light still can.
How hard is B0110 to fix?
Difficulty: medium. A typical repair takes 0.5 to 2.5 hours of work. This is a job for a workshop.
Will B0110 clear itself after the repair?
Clear the code with a scanner after the repair. If the fault is fixed, it does not come back.