P060F code meaning
Internal Control Module Coolant Temperature Performance
Powertrain system Generic code P06xx codes Check engine light
What P060F means
Coolant temperature feeds the torque model of the engine (friction, cold start), which the level 2 monitoring of the electronic throttle concept recalculates. P060F means the module's internal cross-check of this value failed: the temperature used by the main software and the value captured or recalculated by the monitoring level or a second converter path do not agree. No manufacturer table available to us (GM 2004–2025, Ford 2012/2020–23/diesel 2023, Saab) describes P060F with thresholds, so this explanation follows the pattern of P060D/P060E and CARB's rationality requirement for the coolant temperature sensor. Expect a substitute temperature, a permanently running fan and possibly reduced power. Sensor faults themselves are P0115–P0119; if those are present, start there.
P060F at a glance
- Check engine lightYes, usually on
- Emissions testCan fail
- Limp modePossible
- Repair difficultyHard
- Typical labor0.5 to 3 hours
- Clears after repairWhen cleared with a scanner
Symptoms of P060F
- Check engine light or service lamp
- Possibly reduced power
- Radiator fan runs constantly (substitute value)
- Implausible temperature gauge
Common causes of P060F
- PossibleInternal module fault in a converter or processor path
- PossibleFaulty module software (update available)
- Less likelyLoose contact at the coolant temperature sensor that jumps between samples
- Less likelyUnstable supply voltage or poor ground at the module (weak battery, voltage spikes)
Check the most likely causes first. Replacing parts by guesswork is the most expensive way to clear a code.
Parts involved
Engine control moduleEngine coolant temperature sensor
What each part of P060F means
| P | Powertrain system: engine, fuel system, ignition, emissions and transmission. |
| 0 | Generic code: it means the same on every make (SAE standard). |
| 6 | Area: computer (engine control module) and output circuits. |
| 0F | The exact fault in that area. |
What to do next
- Note P060F and any other codes stored with it: several codes together often point to one cause.
- Check for loose connectors and damaged wiring around the parts the code names.
- Check open recalls for your car: some faults are fixed for free by the dealer. Enter your VIN.
- Clear the code only after the repair. If it comes back, the fault is still there.
Buying a used car? Scan it for stored codes before you pay. A recently cleared memory can hide a problem.
Questions about P060F
What does P060F mean?
P060F means "Internal Control Module Coolant Temperature Performance". Coolant temperature feeds the torque model of the engine (friction, cold start), which the level 2 monitoring of the electronic throttle concept recalculates. It is a generic code, so it means the same on every make.
Is it safe to drive with P060F?
Drive gently and only to a workshop. With P060F the car can go into limp mode (reduced power) to protect itself.
Will P060F fail an emissions test?
Yes, it can. P060F is emissions-related, so most inspection programs fail a car while it is stored or while the check engine light is on.
How hard is P060F to fix?
Difficulty: hard. A typical repair takes 0.5 to 3 hours of work. This is a job for a workshop.
Will P060F clear itself after the repair?
Clear the code with a scanner after the repair. If the fault is fixed, it does not come back.