P07FA code meaning
Incorrect Shift from Gear 9
Powertrain system Generic code P07xx codes Check engine light
What P07FA means
P07FA belongs to the series 'Incorrect Shift from Gear N' (P07DC–P07E3 for gears 1–8, P07FA for 9, P07FD for 10): when leaving 9th gear, the transmission ends up in a gear other than the commanded target, or the shift out of 9th goes wrong. No manufacturer document available to us uses it. Ten-speed users such as Ford's 10R family and GM's 10L report such faults through ratio or valve codes; Ford's Diesel summary checks shift completion without a gear-specific code. Possible causes are a sticking shift or clutch valve, a worn or leaking clutch, or wrong adaptives.
P07FA at a glance
- Check engine lightYes, usually on
- Emissions testCan fail
- Limp modePossible
- Repair difficultyHard
- Typical labor0.5 to 12 hours
- Clears after repairWhen cleared with a scanner
Symptoms of P07FA
- Wrong gear or harsh downshift out of 9th
- Transmission warning, possibly limp mode
Common causes of P07FA
- PossibleShift or clutch valve sticking
- PossibleWorn clutch or hydraulic leak on the clutches involved
- PossibleShift adaptives wrong
- Less likelyFluid level or condition
Check the most likely causes first. Replacing parts by guesswork is the most expensive way to clear a code.
Parts involved
Transmission valve bodyShift solenoidTransmission clutchesTransmission control module
What each part of P07FA means
| P | Powertrain system: engine, fuel system, ignition, emissions and transmission. |
| 0 | Generic code: it means the same on every make (SAE standard). |
| 7 | Area: transmission. |
| FA | The exact fault in that area. |
What to do next
- Note P07FA and any other codes stored with it: several codes together often point to one cause.
- Check for loose connectors and damaged wiring around the parts the code names.
- Check open recalls for your car: some faults are fixed for free by the dealer. Enter your VIN.
- Clear the code only after the repair. If it comes back, the fault is still there.
Buying a used car? Scan it for stored codes before you pay. A recently cleared memory can hide a problem.
Questions about P07FA
What does P07FA mean?
P07FA means "Incorrect Shift from Gear 9". P07FA belongs to the series 'Incorrect Shift from Gear N' (P07DC–P07E3 for gears 1–8, P07FA for 9, P07FD for 10): when leaving 9th gear, the transmission ends up in a gear other than the commanded target, or the shift out of 9th goes wrong. It is a generic code, so it means the same on every make.
Is it safe to drive with P07FA?
Drive gently and only to a workshop. With P07FA the car can go into limp mode (reduced power) to protect itself.
Will P07FA fail an emissions test?
Yes, it can. P07FA is emissions-related, so most inspection programs fail a car while it is stored or while the check engine light is on.
How hard is P07FA to fix?
Difficulty: hard. A typical repair takes 0.5 to 12 hours of work. This is a job for a workshop.
Will P07FA clear itself after the repair?
Clear the code with a scanner after the repair. If the fault is fixed, it does not come back.