VinGear VIN decoder VinGearVIN decoder, VIN lookup & history check Check a VIN

P07FD code meaning

Incorrect Shift from Gear 10

Powertrain system Generic code P07xx codes Check engine light

What P07FD means

P07FD closes the series 'Incorrect Shift from Gear N' (P07DC–P07E3 for gears 1–8, P07FA for 9): when leaving 10th gear, the transmission ends up in a gear other than the commanded target, or the shift out of 10th goes wrong. No manufacturer document available to us uses it. Ten-speed users such as Ford's 10R family and GM's 10L report such faults through ratio or valve codes; Ford's Diesel summary checks shift completion without a gear-specific code. Possible causes are a sticking shift or clutch valve, a worn or leaking clutch, or wrong adaptives.

P07FD at a glance

  • Check engine lightYes, usually on
  • Emissions testCan fail
  • Limp modePossible
  • Repair difficultyHard
  • Typical labor0.5 to 12 hours
  • Clears after repairWhen cleared with a scanner

Symptoms of P07FD

  • Wrong gear or harsh downshift out of 10th
  • Transmission warning, possibly limp mode

Common causes of P07FD

  • PossibleShift or clutch valve sticking
  • PossibleWorn clutch or hydraulic leak on the clutches involved
  • PossibleShift adaptives wrong
  • Less likelyFluid level or condition

Check the most likely causes first. Replacing parts by guesswork is the most expensive way to clear a code.

Parts involved

Transmission valve bodyShift solenoidTransmission clutchesTransmission control module

What each part of P07FD means

PPowertrain system: engine, fuel system, ignition, emissions and transmission.
0Generic code: it means the same on every make (SAE standard).
7Area: transmission.
FDThe exact fault in that area.

What to do next

  • Note P07FD and any other codes stored with it: several codes together often point to one cause.
  • Check for loose connectors and damaged wiring around the parts the code names.
  • Check open recalls for your car: some faults are fixed for free by the dealer. Enter your VIN.
  • Clear the code only after the repair. If it comes back, the fault is still there.

Buying a used car? Scan it for stored codes before you pay. A recently cleared memory can hide a problem.

Questions about P07FD

What does P07FD mean?

P07FD means "Incorrect Shift from Gear 10". P07FD closes the series 'Incorrect Shift from Gear N' (P07DC–P07E3 for gears 1–8, P07FA for 9): when leaving 10th gear, the transmission ends up in a gear other than the commanded target, or the shift out of 10th goes wrong. It is a generic code, so it means the same on every make.

Is it safe to drive with P07FD?

Drive gently and only to a workshop. With P07FD the car can go into limp mode (reduced power) to protect itself.

Will P07FD fail an emissions test?

Yes, it can. P07FD is emissions-related, so most inspection programs fail a car while it is stored or while the check engine light is on.

How hard is P07FD to fix?

Difficulty: hard. A typical repair takes 0.5 to 12 hours of work. This is a job for a workshop.

Will P07FD clear itself after the repair?

Clear the code with a scanner after the repair. If the fault is fixed, it does not come back.

Look up another code

Technical content: OBDex open OBD-II database (public domain, CC0), checked 13 Oct 2026, edited for US drivers by the VinGear team.
Technical sources for P07FD