P095C code meaning
Gear Shift Position Circuit C Low
Powertrain system Generic code P09xx codes Check engine light
What P095C means
The signal of shift position sensor C in an automated manual gearbox lies below its permitted voltage window. Typical reasons are a signal wire shorted to ground, a lost sensor supply or a sensor with an internal fault pulling its output down. Because the value is physically impossible, the control unit can flag it quickly without comparing it to other channels. No manufacturer documents this code publicly. A Nissan/Aichi patent shows shift stroke sensors as the position feedback for gear engagement, an Aisin AI patent the fallback strategy when such a sensor drops out. CARB requires circuit checks on such inputs. P095D is the high counterpart, P095A the general and P095B the plausibility fault; P0916 and P091C are the low faults of A and B.
P095C at a glance
- Check engine lightYes, usually on
- Emissions testCan fail
- Limp modePossible
- Repair difficultyHard
- Typical labor0.5 to 4 hours
- Clears after repairWhen cleared with a scanner
Symptoms of P095C
- Transmission or engine warning light on
- Fallback mode with restricted gears
- Gearbox may refuse to leave neutral
Common causes of P095C
- Most likelySignal wire of sensor C shorted to ground
- PossibleOpen or shorted 5 V supply of the sensor
- PossibleInternally failed shift position sensor C
Check the most likely causes first. Replacing parts by guesswork is the most expensive way to clear a code.
Parts involved
Gear shift position sensor cWiring harnessTCM
What each part of P095C means
| P | Powertrain system: engine, fuel system, ignition, emissions and transmission. |
| 0 | Generic code: it means the same on every make (SAE standard). |
| 9 | Area: transmission. |
| 5C | The exact fault in that area. |
What to do next
- Note P095C and any other codes stored with it: several codes together often point to one cause.
- Check for loose connectors and damaged wiring around the parts the code names.
- Check open recalls for your car: some faults are fixed for free by the dealer. Enter your VIN.
- Clear the code only after the repair. If it comes back, the fault is still there.
Buying a used car? Scan it for stored codes before you pay. A recently cleared memory can hide a problem.
Questions about P095C
What does P095C mean?
P095C means "Gear Shift Position Circuit C Low". The signal of shift position sensor C in an automated manual gearbox lies below its permitted voltage window. It is a generic code, so it means the same on every make.
Is it safe to drive with P095C?
Drive gently and only to a workshop. With P095C the car can go into limp mode (reduced power) to protect itself.
Will P095C fail an emissions test?
Yes, it can. P095C is emissions-related, so most inspection programs fail a car while it is stored or while the check engine light is on.
How hard is P095C to fix?
Difficulty: hard. A typical repair takes 0.5 to 4 hours of work. This is a job for a workshop.
Will P095C clear itself after the repair?
Clear the code with a scanner after the repair. If the fault is fixed, it does not come back.