P095D code meaning
Gear Shift Position Circuit C High
Powertrain system Generic code P09xx codes Check engine light
What P095D means
Shift position sensor C of an automated manual gearbox delivers a voltage above its permitted window. This usually points to a signal wire shorted to the supply, a broken sensor ground or, with a pulled-up input, an interrupted signal line. Since no real shift position produces such a value, the module can set the code without cross-checking other channels. No manufacturer documents this code publicly. A Nissan/Aichi patent describes shift stroke sensors as feedback for gear engagement, an Aisin AI patent how control continues when one of them fails. CARB requires circuit checks on such inputs. P095C is the low counterpart, P095A the general and P095B the plausibility fault; P0917 and P091D are the high faults of A and B.
P095D at a glance
- Check engine lightYes, usually on
- Emissions testCan fail
- Limp modePossible
- Repair difficultyHard
- Typical labor0.5 to 4 hours
- Clears after repairWhen cleared with a scanner
Symptoms of P095D
- Transmission or engine warning light on
- Fallback mode with restricted gears
- Jerky or aborted gear changes
Common causes of P095D
- Most likelySignal wire of sensor C shorted to the 5 V supply or battery voltage
- PossibleOpen ground circuit of the sensor
- PossibleInternally failed shift position sensor C
Check the most likely causes first. Replacing parts by guesswork is the most expensive way to clear a code.
Parts involved
Gear shift position sensor cWiring harnessTCM
What each part of P095D means
| P | Powertrain system: engine, fuel system, ignition, emissions and transmission. |
| 0 | Generic code: it means the same on every make (SAE standard). |
| 9 | Area: transmission. |
| 5D | The exact fault in that area. |
What to do next
- Note P095D and any other codes stored with it: several codes together often point to one cause.
- Check for loose connectors and damaged wiring around the parts the code names.
- Check open recalls for your car: some faults are fixed for free by the dealer. Enter your VIN.
- Clear the code only after the repair. If it comes back, the fault is still there.
Buying a used car? Scan it for stored codes before you pay. A recently cleared memory can hide a problem.
Questions about P095D
What does P095D mean?
P095D means "Gear Shift Position Circuit C High". Shift position sensor C of an automated manual gearbox delivers a voltage above its permitted window. It is a generic code, so it means the same on every make.
Is it safe to drive with P095D?
Drive gently and only to a workshop. With P095D the car can go into limp mode (reduced power) to protect itself.
Will P095D fail an emissions test?
Yes, it can. P095D is emissions-related, so most inspection programs fail a car while it is stored or while the check engine light is on.
How hard is P095D to fix?
Difficulty: hard. A typical repair takes 0.5 to 4 hours of work. This is a job for a workshop.
Will P095D clear itself after the repair?
Clear the code with a scanner after the repair. If the fault is fixed, it does not come back.